2003 Nissan Altima 2.5 Sl on 2040-cars

Auto blog

Nissan Recalls More Than One Million Vehicles For Air Bags

Nissan is recalling just over one million cars, SUVs and vans because the front passenger air bags may not inflate in a crash. It's the company's second recall to fix the same problem. The recall affects the Altima midsize car, Leaf electric car, Pathfinder SUV and Sentra compact models from the 2013 and 2014 model years, as well as the NV200 Taxi van and Infiniti JX35 SUV from 2013. Also covered are the Infiniti QX60 and Q50 SUVs from 2014. In documents filed with the National Highway Traffic Safety Administration, Nissan says the vehicles' computer software may not detect an adult in the passenger seat. If that happens, the air bags won't inflate. Nissan will notify owners and dealers will update the software for free. The recall is expected to start in mid-April. Most of the vehicles were recalled in February of last year for a similar problem. Dealers replaced seat sensors, but Nissan said it continued to get consumer complaints and warranty claims in vehicles that had been repaired. Front passenger seats have sensors that determine the passenger's weight and turn off air bags off if a child is on board. The malfunctioning sensors can turn the air bags off even if an adult is in the seat. Nissan received three reports of air bags failing to inflate in a crash. Spokesman Steve Yeager said in an e-mail that he is not sure if anyone was hurt in those incidents. There have been no deaths due to the problem, he said. The recall affects almost 990,000 vehicles in the U.S., another 60,000 in Canada and small numbers in other countries, Yeager said. Related Gallery Nissan Searches For Identity In America

Nissan Canada kills Cube, is US next?

Canadians, say goodbye to the quirky Nissan Cube. In fact, it's too late; it's already gone. The question now becomes whether the boxy model gets the axe in the US as well.
Nissan didn't exactly publicize the Cube's Canadian retirement. An Autos.ca reader noticed that the vehicle was no longer listed on the automaker's official site in the Great White North. He tweeted the company about it and was told, "Yes, the Nissan Cube has been discontinued in Canada."
The news certainly makes you wonder what the future for the model is in the US. The Cube isn't exactly a hot seller here, either. According to Nissan's last sales results, it sold just 356 units in April, down 23.9 percent from a year ago, and 1,604 vehicles from January to April, down 33.7 percent. Annual sales were as high as 23,000 units in 2010, but they started dipping as early as 2011.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.