2008 Lancer Gts on 2040-cars

Auto blog

Mitsubishi recalls Mirage in snowy states for airbag delay

The Basics: Mitsubishi is recalling 25,185 examples of the 2014-2015 Mirage, built between August 7, 2013, and September 2, 2015, sold or ever registered in states that use salt to melt ice on the road during the winter months. Those include Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and the District of Columbia. The Problem: Snow with road salt tracked in on boots could cause a wiring connector to short out behind a kick panel next to the driver's footrest, potentially delaying the deployment of the front airbags. Injuries/Deaths: None reported. The fix: Mitsubishi dealers are being instructed to inspect the electrical connectors, replace any corroded ones, and fit a waterproof sheet to prevent any further corrosion. No timeframe has been set as of yet. If you own one: Try not to track in too much snow. Watch out for the SRS warning light on the dashboard, which will alert you if there's a problem with the airbags. Expect to hear from Mitsubishi Motors North America in due course to arrange for your vehicle to be checked out at a local dealer. Related Video: RECALL Subject : Air Bag Deployment may be Delayed due to Corrosion Report Receipt Date: DEC 04, 2015 NHTSA Campaign Number: 15V815000 Component(s): AIR BAGS , ELECTRICAL SYSTEM All Products Associated with this Recall Manufacturer: Mitsubishi Motors North America, Inc. SUMMARY: Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2014-2015 Mitsubishi Mirage vehicles manufactured August 7, 2013, to September 2, 2015 and originally sold in, or ever registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and District of Columbia. If the driver enters an affected vehicle with their boots covered with snow mixed with road salt, the melting snow may soak through the carpet and cause corrosion to a wiring connector located in a junction box behind a kick panel to the left of the driver's footrest. CONSEQUENCE: In the event of a crash, corrosion of the connector could delay deployment of the frontal air bags, increasing the risk of injury to the driver and the front seat passenger.

Mitsubishi Outlander PHEV is fourth plug-in to reach 100,000 sales

After what seems like a lifetime of delays, the Mitsubishi Outlander PHEV will finally arrive in this US in " late summer, early fall." What's taken so long? Well, Mitsubishi had to sell 100,000 of the big plug-in hybrids in Europe and Japan first, apparently. You could see the milestone coming, since sales have been strong in the markets where the Outlander PHEV was available, with around two-thirds of its sales coming from Europe, Hybrid Cars says. When we spoke with Don Swearingen, executive vice president of Mitsubishi Motors North America (MMNA) earlier this year, he said that sales of around 200-400 Outlander PHEVS a month (10-20 percent of the Outlander's total US monthly sales) would be, " a very good number." Inside EVs says that the Okazaki Plant where the Outlander PHEV is made, " is running at full swing." As Hybrid Cars points out, the Outlander PHEV is only the fourth plug-in car ever to sell 100,000 units. The others are the Nissan Leaf (roughly 218,000 sales worldwide), the Tesla Model S (120,000), and the Chevy Volt (110,000). The next likely candidate to cross this threshold is the Prius Plug In – it has around 75,000 sales – if we count the upcoming Prius Prime updates as the same vehicle. Related Video:

Mitsubishi Concept XR-PHEV II points the way forward with its angular look [w/video]

The Mitsubishi Concept XR-PHEV II on display at the Geneva Motor Show isn't really a completely new vehicle but more of thorough reworking of the earlier XR-PHEV from the 2013 Tokyo Motor Show. For the latest interpretation, the Japanese brand is getting the design ready for an eventual debut for the road. While the two concepts look practically identical at first glance, the XR-PHEV II is far more possible for production than its predecessor. The grille and hood now feature openings to let the vehicle cool its plug-in hybrid system, and the rear design offers enough glass to actually let the driver see out of the back. The interior for the latest version also looks mostly functional this time and is clad in eye-catching orange upholstery. The XR-PHEV II's powertrain is a bit more mysterious, though. It's a front-wheel drive PHEV that's powered by a 12-kWh battery and offers a total output of 160 horsepower. However, Mitsubishi isn't taking about the internal combustion engine's displacement or the model's transmission. Still, the company is clear that this look is a glimpse at its future crossovers, and that would be a welcome change. XR-PHEV II's more angular design would certainly liven up Mitsubishi's somewhat staid lineup.