12 Mini Cooper S Countryman All4 Sport Technology Navigation Premium Panorama Nr on 2040-cars

Auto blog

2025 Mini Cooper SE John Cooper Works gets more pizzazz, no more power

The new-generation Mini Cooper SE will come with a John Cooper Works edition, but this time it brings cosmetic changes only. The 2023 Cooper S two-door made 189 horsepower and 206 pound-feet of torque from its 2.0-liter four-cylinder engine, the JCW version made 238 hp and 235 lb-ft from the same engine. This time, the electric powertrain in the JCW trim makes the same 215 hp and 253 pound-feet of torque from a single motor on the front axle as it does in the 2025 Mini Cooper SE, powered by a matching 54.2-kWh battery. The 0-62 mph time takes the same 6.7 seconds, and European regulators give it the same 250-mile range on the WLTP cycle.  It won't be confused for the regular hatchback otherwise. If the red stripes don't give the game away, the chunky diffuser in the front will. Backing up that aero mod, there are Chilli Red side mirror caps and a Chilli Red roof finished with a hatch spoiler, red JCW-logo brake calipers, a gloss black surround for the grille, snazzy two-tone wheels in a design called Lap Spoke, and, naturally, JCW logos sprinkled about. Those with a keen eye for Mini won't need all that, they'll spot the twin horizontal bars for DRLs, signifying JCW's minimalism and raciness.  The cabin's synthetic leather and knitted fabric gets held together with red stitching. On the seats, this is arranged with knitting above, vinyl below. The instrument panel and door cards wear what Mini calls a "knit covering," stylized checkered flags forming a recurring pattern. For even more red, the driver can set the drive mode selector to Go-Kart Mode, calling up an anthracite red lighting scheme for the central OLED display and ambient illumination. Basically the JCW version of a Sport mode, it unleashes sharper throttle response and a "special Go-Kart sound," too.  Pricing isn't out yet, and we don't expect it until we're much closer to the 2025 launch for this market. Related video:

Utah man builds iRacing simulator inside 2005 Mini Cooper S

Brent Cheney is an artist and part-time racer who used to own a tuning shop for time attack cars. That's why, when he decided to get into iRacing and wanted an immersive simulator, he wouldn't settle for mere technical excellence. As first covered by Salt Lake City's KSL news, then in more detail by Motor Authority, Cheney decided he wanted to cut a car into pieces, and rebuild it in the basement of his Salt Lake City, Utah house with a racing sim inside. He needed "the right aesthetic," ruling out something like a Toyota Corolla, but he refused the sacrilege of cutting up anything too precious to an enthusiast. After narrowly missing out on buying a 1999 BMW M3 convertible, then turning to a Mitsubishi Eclipse done up in splashy green like Brian O'Conner's car in the original "Fast and Furious," he ended up with a Mini Cooper. The Brit was a better choice than the German and the Japanese, in fact, thanks to a hardtop that would create a dark enclosure, and seams and shutlines in the right places to hide the necessary cuts.  Cheney found a 2005 Cooper S that had been junked over an engine issue, getting the coupe for $1,000 and parting out the internals he didn't need for the same $1,000 he paid. After watching a YouTube video on how to cut a car, he dismembered the Cooper into seven pieces with a cordless reciprocating saw wielding a Diablo Steel Demon 6-inch blade, and carried the pieces into his man cave. He reassembled those pieces on a wood base with the aid of 200 brackets and many more sheetmetal screws, nuts, and bolts. Once the car was put back together, body parts and trim pieces hid all the seams. Before reinstalling the interior, the artist laid in the sim equipment. After doubling the minimum requirements for iRacing, Cheney's system included an Intel Core i9 8-core processor NVIDIA GeForce RTX 2080 8 GB Founders Edition video card running Windows 10 inside a Thermaltake PC case under the Cooper S hood, as the new "engine." A Fanatec Podium DD1 direct-drive steering column and wheel and Fanatec V3 pedals went in the cabin, along with a Harman Kardon home theater 5.1 surround sound system. He mounted the wheel on the Mini's steering column with a fabricated adapter, put the Fanatec pedals where the car's pedals had been, put a ButtKicker Mini transducer in the original Mini seat for extra realism, and hid all the wiring beneath the carpet and interior trim components.

Mini's Superleggera concept could see production; here's what it might look like

We fell in love with the Mini Superleggera Vision Concept from the moment we laid eyes on it. The little convertible blends retro and modern together better than any Mini in years. There is even more good news about the roadster as well because the company is considering actually building it. We even have some renders of what the production version could look like.
Mini boss Peter Schwarzenbauer tells Automotive News at the 2014 Concorso d'Eleganza Villa d'Este, that the Superleggera might have a life beyond its debut. "We wanted to test how Mini enthusiasts worldwide were reacting to such a different type of Mini. So far, it has re
ceived overwhelming appreciation," he said to AN. But here's the bad news. All of the unique elements of the droptop wouldn't be cheap to build. Pricing would likely be around 35,000 euros if BMW gives it the green light, according to Schwarzenbauer. It's too early to know whether the road car would use the electric motor from the concept or something more conventional.