We Finance 2008 Mini Cooper Hardtop S Auto Clean Carfax Warranty Htdsts Cd Pano on 2040-cars

Auto blog

2021 Mini Countryman shows off its fresh face

The 2021 Mini Countryman has been spied once again, and it has shed some of its camouflage. We get a really good look at what appears to be the base Countryman's new front and rear fascias, updated taillights and interior. Otherwise, the little crossover is mostly unchanged. Up front, the bumper changes from three large grille openings to one standard one, and it gets the same slats as the grille between the headlights. On either side are big, round fog lights, which are themselves flanked by openings that probably create wind curtains around the wheels. Looking at the headlights, they have new internals with more squared-off projector surrounds. We also get some good looks at the John Cooper Works model. The shots of it at the Nurburgring give us a good look at the front, which looks generally unchanged with the same front bumper as the current car, but possibly with a new grille and headlight design. At the back, the car reveals new Union Jack taillights similar to those introduced on the Mini Hardtop and Clubman. Another photo shows what seems to be a John Cooper Works Countryman with part of a cloth cover lifted. This shows the rear bumper is mostly the same, but it gets a new mesh grille pattern over the rear diffuser area. Finally, we get a look at the interior. Most of it is the same, but the instrument cluster loses the analog dial of the current model. In its place is the oval-shaped cluster from the Mini Cooper SE electric car, which likely combines analog dials on either side with a screen nestled between. These changes are all relatively minor, and seem to be production ready. As such, we would expect the changes to be introduced for the 2021 model year. The reveal could be later this year. Of course, it's also possible the changes could be pushed back in the wake of the coronavirus crisis. Related Video:

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

The Mini John Cooper Works Rally is set for Dakar

In recent years, there have been convincing Minis tailored for rallying: Dakar wins were accumulated with gusto. Now there is a new version for 2017, named the Mini John Cooper Works Rally. Its debut will be the 2017 Dakar Rally running through Bolivia, Paraguay, and Argentina. The new rally car has been built with experience gathered from rallying the earlier Mini All4 Racing, and it's based on the Countryman. Key areas reworked were the aerodynamics and the weight distribution to enable a lower center of gravity. As X-raid (Mini's motorsports partner) CEO Sven Quandt puts it: "The center of gravity has gone down substantially – we placed about 50 kilos [110 pounds] downwards by some 50 centimeters [19.7 inches] in the center of the car, which helps the handling and makes the car much more comfortable over all types of terrain, and aids the handling on a rally track with lots of corners." There is a new chassis frame, and the powertrain benefits from an updated engine mapping and thermal management. The interior has also been redone. Speaking of the powertrain, the Cooper Works Rally runs a 3.0-liter straight six from BMW's turbodiesel portfolio. In this guise, the TwinPower unit produces 340 horsepower at 3,250 rpm and a very respectable 590 lb ft of torque from 1,850 rpm. The retained ALL4 four-wheel-drive system has a six-speed SADEV sequential gearbox, together with lockable, oil-cooled Xtrac diffs with a central SADEV unit. The 2017 Dakar Rally runs from January 2-14. Related Video: