S Turbo Auto Sport Pano Roof 1 Owner Low Miles 39k Must See!! Carfax Guarranty on 2040-cars

Auto blog

Mini Hardtop's next generation could be smaller, electric-only

Mini has started developing the fourth-generation Hardtop it will release in the early 2020s. Many aspects of the car aren't set in stone yet, but the company's chief executive revealed his team is considering making the hatchback smaller than the current model by offering it only as an electric car. The cheeky Hardtop has ballooned in size since the first-generation model arrived in 2000. The current, two-door variant of the car (pictured) is eight inches longer, two inches taller, and about 250 pounds heavier than the original BMW-developed hatchback. Company boss Bernd Koerber told British magazine Auto Express that he's pushing his team to make the next Mini small again. Going electric-only would allow engineers to get close to the original Hardtop's footprint. An electric motor is more compact than a comparable gasoline-powered engine, and the battery pack can be cleverly integrated in a part of the car that doesn't extend its length. Whether Mini will manage to integrate a bulky battery pack into the Hardtop while shaving 250 pounds remains to be seen. "I would love to see Mini move back to the essence of clever use of space. That means the outer proportions on the core Mini Hardtop could be reduced. I can see that happening," Koerber explained. He added shrinking the hatchback wouldn't make it less practical. Auto Express speculated Mini might sell the current, third-generation Hardtop alongside its replacement for several years to satisfy motorists not interested in going electric. This strategy will become increasingly common during the 2020s; the Fiat 500 will soldier on in Europe after the launch of its battery-powered successor, and Porsche confirmed it will manufacture the first- and second-generation variants of the Macan side by side to give customers exactly what they're looking for. Going electric-only wouldn't be the cheapest, easiest way to replace the Hardtop. The firm can't use the BMW-sourced platform that underpins the recently-released Cooper SE because it's too big, so it would need to develop a new architecture specifically for it. Engineers would also need to figure out how to develop an electric follow-up to the John Cooper Works-badged hot hatch. None of these problems are insurmountable, but they're expensive to solve, so Mini's executives are giving themselves time to weigh the pros and cons of reinventing the heritage-laced British icon yet again.

2020 Mini E caught in the Alps with concept looks

The upcoming full-electric 2020 Mini E hatchback has been spotted in the wild, specifically the Alps. One of our spy photographers caught it while recharging. Fans of the concept shown at the 2017 Frankfurt Motor Show will be pleased to see that this more production-ready car takes many cues from the show car. Unsurprisingly, the car does look pretty much the same as the standard Mini Hardtop. It has the round lights, broad grille section and upright Mini body. Differences show up first with the grille. Most of it is solid, which is understandable since an electric car typically doesn't need the amount of airflow an internal combustion car needs. There is a strip in the middle that is open, evident by circular cutouts. This is also a design that was featured on the concept, in which the two halves of the grille were solid, with an open slot dividing them. The rest of the bumper appears to be the same one used on the standard Mini Cooper Hardtop. The sides of the car also seem to be identical to the normal Minis, but the wheels are unique to this electric iteration. They're cool four-spoke alloys that have aren't completely symmetrical. Three of the spokes are open and finished, but one has some additional metal, and it seems to connect with the center section where the lug nuts are. There will probably be a cover that goes over these sections. The overall look is directly taken from the Frankfurt concept. At the back, the electric Mini still looks like a Mini, but with no provisions for an exhaust pipe. It also uses taillights from the pre-refresh model, but with some neat hexagonal texture on the lens. These will probably be replaced by the new Union Jack taillights, though. The interior continues the current Mini looks. The seats do have an interesting upholstery. It looks a bit like a gray denim. This production Mini E Hardtop should arrive sometime next year, in keeping with BMW's promise made with the concept car's reveal. Specs are unknown, but we hope it will be comparable in power with the original Mini E introduced for the 2009 model year. That car had an impressive 204 horsepower and 162 pound-feet of torque. Hopefully the new model will also improve on the old car's range, which was about 150 miles according to BMW. Related Video:

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out