Mini Cooper With Sunroof, Leather And Clean Carfax! ~no Reserve~ on 2040-cars

Auto blog

Mini JCW E PROtotype is a full-fat electric John Cooper Works

Mini has been revealing or teasing or launching variants of its all-new lineup since last September. It's not too much yet, but there's a lot of Mini going on. Here's the latest, the camouflaged Mini Cooper JCW E Prototype that will make its public debut at the Goodwood Festival of Speed for a run up the hill, introduced to us six weeks after Mini showed us a camouflaged internal-combustion Cooper JCW. And, if you'll remember, Mini showed an electric version of the new Cooper SE JCW last December. This JCW is going to rock more juice down electric avenue, though, the automaker saying there's an "advanced electric powertrain ... with cutting-edge technology" hiding under the skin. The expectation is that the JCW E will use the same 54.2-kWh battery as in other Minis, but its front-mounted motor will make more than the 215 horsepower and 253 pound-feet of torque applied to the Cooper SE and Cooper SE JCW. Brand execs told Autocar that engineers worked to maintain a "go-kart feeling," imparting similar sensations to the gas-powered JCW, the electric version's greater weight getting necessitating larger wheels and wider tires to improve grip. A stiffer suspension and larger brakes should also be involved. And although the new architecture can support a dual-motor powertrain, there seems little chance of that happening.     Same as the gas-powered Mini, the red and white camo is an homage to the red and white color schemes used in the 1960s for Minis in motorsports. The "37" logo commemorates the #37 Mini Cooper winning the 1964 Rallye Monte Carlo. Across the windshield, "Bulldog Racing" touts the team that won its class in this year's Nurburgring 24-Hour race with a new camo'ed Mini.  After the Mini JCW E's Prototype's run up the hill next weekend, the automaker says the global reveal comes in autumn this year.

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Mini Multitone Edition brings triple-color roof to more models

Last year's refreshed Mini line-up introduced the "Multitone" roof for the Mini Cooper SE. It featured three paint colors on the roof that faded into one another. Now that option is available on many more Minis with the Multitone Edition, which also picks up a unique design and trim pieces to accent the fancy top. The Multitone Edition is available on all Mini 3-Door and 5-Door Hardtops as well as the Clubman wagon. The Hardtops are only offered in "Sage Green" while the Clubman only comes in "Indian Summer Red." All of them get a Multitone roof in white, silver and black (the blue and red options from the SE seem to remain exclusive to the little electric hatch). Setting this grayscale roof apart is a set of perpendicular "rainbow" stripes done in a satin clearcoat. This motif is continued around the car where it appears in the two-tone green and red badging on the wheels and fender "scuttles." It also appears on the dashboard and other interior trim. And on the topic of trim, parts that were chrome on regular Mini models are a bright gloss white such as the light surrounds, door handles and fuel filler cap on S models. Two-tone alloy wheels are offered in 17- and 18-inch sizes. Pricing and availability haven't been announced yet. Expect to see the option available sometime this year, and a small premium over whatever trim level it's added to. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2024 Mini Hardtop winter testing footage before unveiling