Manual Transmission, Leather, Panoramic Sunroof, Only 9,600 Miles! on 2040-cars

Auto blog

2014 Mini Cooper S

One of the big challenges as an automotive journalist is reviewing cars that you have a personal connection to. I have a strong passion for Minis. My first new car was a 2004 Cooper S, and I still own a 2006 model. It's this affinity that's left me with a general disdain of the 2007 to 2013 model relative to my first-gen.
The last-generation cars, with their turbocharged engines, softer suspensions, duller steering and homelier looks are, in my mind, inferior to their 2002 to 2006 predecessors. As a car reviewer, though, I couldn't in good conscience argue the same point. The R56, as the last-gen cars were known internally and by enthusiasts, was a better-balanced vehicle that retained the lion's share of the abilities and character of the first-generation, R53 Cooper S, but they were better thought out, better designed, more livable, and felt like more complete products.
Before the third-generation of the reborn Mini Cooper S landed in my driveway, I couldn't help but wonder whether the model would continue its slide towards mass appeal, or if it would re-embrace the enthusiast realm with a stronger driver-focused mission. As I found out during my week with the car, it was a bit of both.

The UK votes for Brexit and it will impact automakers

It's the first morning after the United Kingdom voted for what's become known as Brexit – that is, to leave the European Union and its tariff-free internal market. Now begins a two-year process in which the UK will have to negotiate with the rest of the EU trading bloc, which is its largest export market, about many things. One of them may be tariffs, and that could severely impact any automaker that builds cars in the UK. This doesn't just mean companies that you think of as British, like Mini and Jaguar. Both of those automakers are owned by foreign companies, incidentally. Mini and Rolls-Royce are owned by BMW, Jaguar and Land Rover by Tata Motors of India, and Bentley by the VW Group. Many other automakers produce cars in the UK for sale within that country and also export to the EU. Tariffs could damage the profits of each of these companies, and perhaps cause them to shift manufacturing out of the UK, significantly damaging the country's resurgent manufacturing industry. Autonews Europe dug up some interesting numbers on that last point. Nissan, the country's second-largest auto producer, builds 475k or so cars in the UK but the vast majority are sent abroad. Toyota built 190k cars last year in Britain, of which 75 percent went to the EU and just 10 percent were sold in the country. Investors are skittish at the news. The value of the pound sterling has plummeted by 8 percent as of this writing, at one point yesterday reaching levels not seen since 1985. Shares at Tata Motors, which counts Jaguar and Land Rover as bright jewels in its portfolio, were off by nearly 12 percent according to Autonews Europe. So what happens next? No one's terribly sure, although the feeling seems to be that the jilted EU will impost tariffs of up to 10 percent on UK exports. It's likely that the UK will reciprocate, and thus it'll be more expensive to buy a European-made car in the UK. Both situations will likely negatively affect the country, as both production of new cars and sales to UK consumers will both fall. Evercore Automotive Research figures the combined damage will be roughly $9b in lost profits to automakers, and an as-of-yet unquantified impact on auto production jobs. Perhaps the EU's leaders in Brussels will be in a better mood in two years, and the process won't devolve into a trade war. In the immediate wake of the Brexit vote, though, the mood is grim, the EU leadership is angry, and investors are spooked.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.