Beautiful Cooper S, Local Santa Barbara One Owner With Low Miles!!! on 2040-cars

Auto blog

The Mini John Cooper Works Rally is set for Dakar

In recent years, there have been convincing Minis tailored for rallying: Dakar wins were accumulated with gusto. Now there is a new version for 2017, named the Mini John Cooper Works Rally. Its debut will be the 2017 Dakar Rally running through Bolivia, Paraguay, and Argentina. The new rally car has been built with experience gathered from rallying the earlier Mini All4 Racing, and it's based on the Countryman. Key areas reworked were the aerodynamics and the weight distribution to enable a lower center of gravity. As X-raid (Mini's motorsports partner) CEO Sven Quandt puts it: "The center of gravity has gone down substantially – we placed about 50 kilos [110 pounds] downwards by some 50 centimeters [19.7 inches] in the center of the car, which helps the handling and makes the car much more comfortable over all types of terrain, and aids the handling on a rally track with lots of corners." There is a new chassis frame, and the powertrain benefits from an updated engine mapping and thermal management. The interior has also been redone. Speaking of the powertrain, the Cooper Works Rally runs a 3.0-liter straight six from BMW's turbodiesel portfolio. In this guise, the TwinPower unit produces 340 horsepower at 3,250 rpm and a very respectable 590 lb ft of torque from 1,850 rpm. The retained ALL4 four-wheel-drive system has a six-speed SADEV sequential gearbox, together with lockable, oil-cooled Xtrac diffs with a central SADEV unit. The 2017 Dakar Rally runs from January 2-14. Related Video:

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

2015 Mini Cooper stuns crowd, itself [w/videos]

Remember the Mini Rocketman concept from 2011? While we were really, really hoping for a production version - a properly mini Mini - that never happened. And it won't. But what we are getting is a whole lot of that showcar's styling cues applied to the third-generation Mini Cooper hardtop, a model making its debut here at the LA Auto Show. And while from most angles, the new Mini is as cute as ever, we just can't quite warm up to that face - or that huge front overhang. The car simply looks like a frightened goldfish (that yellow paint isn't helping, either).
The car simply looks like a frightened goldfish (that yellow paint isn't helping, either).
It should probably be pretty nice to drive, though, with the base Cooper using a new turbocharged 1.5-liter three-cylinder engine good for 134 horsepower and 162 pound-feet of torque. Friskier Cooper S models get a healthy power increase, their 2.0-liter turbo engines putting out a full 189 hp and 207 lb-ft, with both engines are mated to either a six-speed manual or automatic transmission.