2011 Mini Cooper With Sunroof Clean Carfax!! on 2040-cars

Auto blog

Thanks to smaller engines, vehicle dependability falls for first time in 16 years

As automakers have made engines smaller and smaller to improve fuel economy, problems in those vehicles have gotten bigger and bigger. That's the synopsis of a J.D. Power vehicle-dependability study, which found that dependability dropped for the first time in 16 years, largely because the proliferation of four-cylinder engines is causing the vehicles to be less reliable. Specifically, the number of problems per 100 vehicles (or what J.D. Power calls PP100) during the past 12 months for 2011 model-year vehicles rose six percent from the year-earlier figures for 2010 model-year cars. Singling out four-cylinder vehicles revealed about a 10-percent increase in problems during the past year. This issues largely related to engine hesitation, rough transmission shifting and lack of power, signaling the inability of vehicle makers to iron out some of the problems in their smaller engines as they strove for better fuel economy. Six- and five-cylinder engines proved far more reliable. Among car brands, BMW's Mini sub-brand came out as least reliable, with 185 problems per 100 vehicles during the past year. Toyota's Lexus badge was easily the most reliable, with just 68 problems per 100 vehicles. Coming in second place was Mercedes-Benz. The overall average was 133. Check out J.D. Power's press release below. J.D. Power Reports: Increased Engine and Transmission Problems Contribute to Decline in Vehicle Dependability for The First Time in More Than 15 Years General Motors Company Receives Eight Segment Awards, While Toyota Motor Corporation Garners Seven and Honda Motor Company Earns Six WESTLAKE VILLAGE, Calif.: o Owners of 3-year-old vehicles (2011 model year) report more problems than did owners of 3-year-old vehicles last year, according to the J.D. Power 2014 U.S. Vehicle Dependability StudySM (VDS) released today. The study, now in its 25th year, examines problems experienced during the past 12 months by original owners of 2011 model-year vehicles. Overall dependability is determined by the number of problems experienced per 100 vehicles (PP100), with a lower score reflecting higher quality. The study finds that overall vehicle dependability averages 133 PP100, a 6 percent increase in problems from 126 PP100 in 2013. This marks the first time since the 1998 study that the average number of problems has increased. "Until this year, we have seen a continual improvement in vehicle dependability," said David Sargent, vice president of global automotive at J.D.

2025 Mini Countryman First Drive Review: Mini no more

CASCAIS, Portugal — LetÂ’s cut straight to the issue of size. If the original Mini was a sporting beagle ready for the hunt, the reborn version that hit the world stage in 2001 may have been an English bulldog, albeit bred in Germany, its parents being the engineers and coffers of BMW. From there, the Mini brand has grown in size in regular increments, culminating with the 2025 Mini Countryman thatÂ’s the subject of this review. The first Countryman that we first tested in 2011 was comparatively large for the brand, but was suitably mini by SUV standards. Its stocky proportions moved it well into the working dog class. And then the second-generation Mini Countryman debuted for the 2017 model year, gaining 8 inches in length and more than 5 inches of width over its predecessor. We described it as “still in keeping with the brand's ethos from the very beginning when Alec Issigonis created a car that was microscopic on the outside but disproportionately spacious inside.” Nevertheless, it was starting too look a little husky, if you catch our drift. Consider the 2025 Mini Countryman a mastiff, then. Compared to the second-gen Countryman it replaces (which, as we already pointed out was much larger than the first edition), the new version is 5.1 inches longer, 2.4 inches taller and 0.8 inch wider. This translates into additional interior space for passengers and cargo, but adds an awful lot of visual and physical girth to something wearing a badge that literally calls out a diminutive size. The proportions are well considered, but parked next to the old car, the new Countryman sticks out like a sore thumb. Literally, like one thatÂ’s swollen post-accidental-hammer strike. When the full Countryman model lineup is available Stateside, a base model may well be included, but at least for the start of 2025 production the lineup will start with an S edition for $39,895 that will have 241 horsepower and 295 pound-feet of torque. WeÂ’re not driving that today. Instead, the subject of this review will be the only other gas-powered Countryman: the high-performance John Cooper Works edition or JCW. The new Countryman JCW starts at $47,895 and is powered by a 2.0-liter turbocharged four-cylinder that spins out 312 ponies (up from 301) and 295 pound-feet of torque (unfortunately down from 331) to all four tires through a seven-speed dual-clutch gearbox and MiniÂ’s ALL4 all-wheel-drive system.

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.