2011 Mini Cooper Base Convertible 2-door 1.6l Automatic on 2040-cars

Auto blog

Mini getting serious with next Countryman SUV

With the core Hardtop and new Clubman already revealed, Mini is moving along with its plans to expand its model lineup around five "hero" models. Next down the pipeline will likely be the new Countryman, which Autocar projects will be larger and more rugged than the existing model. According to the British publication, the new Mini Countryman is set to take more of a proper SUV approach than the outgoing crossover. That means an even larger form, and more serious off-road chops to better take advantage of the connection with the X-Raid rally machine that has been dominating Dakar for the past four years. It's expected to be based on the same UKL front-drive architecture as the Hardtop, Clubman, and BMW 2 Series Active Tourer, and offer the latter's all-wheel-drive system as well. Those underpinnings would still make it a crossover, strictly speaking, but with a more rugged approach. It could also emerge a good half-foot longer than the model it will replace, over a third of an inch wider, and offer considerably more cargo space. Although the existing Countryman was derided by many as a step too far for the Mini brand, it ended up accounting for a substantial share of the company's sales – making its replacement a no-brainer for the BMW Group. That's more than could be said for the quirky Paceman crossover coupe, which is not expected to follow this time around, however a slant-backed Countryman variant could be in the cards. The next question is what Mini might do next. Of the five core models it's anticipated to launch, the Countryman would be the third. The Superleggera roadster, a smaller hatchback like the Rocketman concept, and a larger minivan potentially to be dubbed the Traveller have all been rumored. Of course, whatever goes into production could be something else entirely. We'll just have to wait and see. Related Video:

2015 Mini Cooper stuns crowd, itself [w/videos]

Remember the Mini Rocketman concept from 2011? While we were really, really hoping for a production version - a properly mini Mini - that never happened. And it won't. But what we are getting is a whole lot of that showcar's styling cues applied to the third-generation Mini Cooper hardtop, a model making its debut here at the LA Auto Show. And while from most angles, the new Mini is as cute as ever, we just can't quite warm up to that face - or that huge front overhang. The car simply looks like a frightened goldfish (that yellow paint isn't helping, either).
The car simply looks like a frightened goldfish (that yellow paint isn't helping, either).
It should probably be pretty nice to drive, though, with the base Cooper using a new turbocharged 1.5-liter three-cylinder engine good for 134 horsepower and 162 pound-feet of torque. Friskier Cooper S models get a healthy power increase, their 2.0-liter turbo engines putting out a full 189 hp and 207 lb-ft, with both engines are mated to either a six-speed manual or automatic transmission.

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out