2008 Mini Cooper S Hatchback 2-door 1.6l on 2040-cars

Auto blog

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

2015 Mini Cooper snapped uncovered on the road

The third generation of reborn Mini is nearly upon us. Just look at the trail of breadcrumbs the Anglo-Saxon automaker has been leaving us.
First we saw the upcoming new Mini Cooper, spied from above at a photo shoot, which Mini was quick to point out was not its best angle. Then BMW's retro-hatch division showcased the Mini Vision concept, and followed up just yesterday with details of the new engines and chassis that will underpin the latest model. And now we have the clearest batch of spy shots we've seen yet.
Not only were these shots taken from a better angle, but also show the new Mini in the more tempting Cooper S trim - complete with hood scoop, split-spoke alloys, roof spoiler and twin central exhaust tips.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.