2007 Mini Cooper S Convertible ! Low Miles ! Fun In The Sun ! Best Buy ! Wow ! on 2040-cars

Auto blog

Mini Clubman to get the 'Works,' four-door Hardtop not so much

Performance sub-brands are expanding faster than leftover marshmallow Peeps in a microwave. And Mini's John Cooper Works line is not likely to be an exception. Mini's stand at the New York Auto Show was somewhat low-key, with the debut of the Clubman All4 all-wheel-drive variant on one end and the expected John Cooper Works Convertible on the other. And for the foreseeable future, the Mini lineup will change through redesigns of existing models and the introduction of more derivatives – like a John Cooper Works version of the new Clubman. At least that's what some of Mini's product guys indicated. "The Works is always our top model. John Cooper Works is not just limited to small cars, it's also for compact cars," said Ralph Mahler, Mini's head product manager, in an interview with Autoblog at the New York Auto Show. "Therefore, I wouldn't see anything against bringing the Works to the Clubman. I think it would be a perfect match." Though one was offered in the last generation, a Works model may seem at odds with the new Clubman's mission, as the company has spent considerable effort pitching it as the grown-up Mini, something to rival premium-branded compacts. Yet Mahler sees a possible Works Clubman as the ultimate in the lineup and an exclusive model, especially since he said take rate for the rest of the Works Minis is around 5 percent. Patrick McKenna, Head of Product Planning at Mini USA, said that since the Clubman went on sale early this year, ordering has included mostly highly optioned models, and customers are notably cross-shopping the Audi A3. Loaded up, a Clubman Cooper S All4 pushes past the $45,000 mark. Currently, the most powerful Cooper S produces 189 horsepower from its 2.0-liter turbo four. That's more power than a front-drive A3 1.8T, but less than the A3 2.0T Quattro – and way less than a cheaper Volkswagen Golf GTI. Consider that the engine in the just-released John Cooper Works Convertible produces 30 more horses than the one in the Cooper S and a Works Clubman starts to make more sense. Strangely, the four-door Mini Hardtop, released last year, doesn't appear to be destined for the Works treatment. McKenna said the four-door will continue to offer special appearance packages that offer Works-like touches and offer dealer-installed accessories such as exhausts and horsepower increases.

2020 Mini E spy photos reveal its interior

The 2020 Mini E electric hatchback has been spied once again. It doesn't reveal much on the outside, in fact it actually shows less than the last time, since this one doesn't have the groovy concept-inspired wheels. But our spy photographer managed to get a good shot of the interior, which reveals some neat details. Chief among the interior's changes is the instrument panel on the steering column. While current gasoline-powered Minis have a typical needle-and-dial set of gauges on the column, those have been replaced by a thin screen. In an effort to keep it from looking too out of place, it has semi-circle ends and a chrome ring around the screen. Odds are that the actual screen will likely be in the middle, and additional warning and indicator lights will fill up the circular ends. Other than the screen, the only other major change is the shifter. Instead of the round leather knob of conventional automatic Minis, it has a more rectangular knob made entirely of plastic. The rest of the Mini's interior is like any other current model. The vents, controls and infotainment are all taken right from the other Minis. Interestingly, this Mini E has carbon fiber interior trim. This will probably be an option, not standard equipment. We expect the electric Mini Hardtop will make its debut sometime next year. If we're lucky, it may make the same 204 horsepower and 162 pound-feet of torque as the original Mini E and more than that car's 150 mile range. Related Video:

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.