2007 Mini Cooper S on 2040-cars

Auto blog

2020 Mini Cooper SE First Drive | Little range, big fun

The all-electric Mini Cooper has been a long time coming. The company’s first step toward electrics began in 2008 with the experimental Mini E, a car that used a powertrain co-developed with an outside company and that had some major compromises. It didn't have a back seat, there was even less cargo space than a regular Mini and it wasnÂ’t available to purchase, being offered in limited numbers for a short lease. More than a decade later, the 2020 Mini Cooper SE is available for purchase or lease to anyone, and offers the complete Mini experience, with in-house BMW-Mini technology and fewer compromises. ThatÂ’s also how Mini is marketing the Cooper SE: The S in the name is there to tell you it's as much fun to toss around as the grin-inducing Cooper S. The blunted performance from extra weight and limited range might say otherwise, but from behind the wheel, this is a Mini worthy of its S, and not some fun-challenged economy-mobile. The powertrain uses the same electric motor youÂ’ll find in a BMW i3. It makes 181 horsepower and 199 pound-feet of torque, which is just 8 hp and 8 lb-ft less than the gas Cooper S. Weight is an issue for performance numbers, since the 3,153 lbs SE lugs around an extra 453 lbs compared with its gas sibling. That reduces its 0-60 mph time from 6.5 seconds to 6.9, and its top speed also drops to just 93 mph as a function of its single-speed transmission. But a half-second to 60 mph is less significant from behind the wheel. Simply put, the Mini Cooper SE feels sprightly. It has the electric motor trademark of instant throttle response, which is amplified by the more aggressive throttle setting in Sport mode. The other trademark is a big lump of torque, though not quite as much as the tire-torching Chevy Bolt EV or Hyundai Kona Electric. These characteristics make the Mini fun for squirting around town and for making passes on the highway. Power starts falling off if you keep your foot down, so on-ramps arenÂ’t as thrilling as the longer-legged gas Minis. Also impressive are the regenerative braking modes. The Cooper SE has a mild mode and an aggressive one, with the former feeling a bit like the engine braking in a manual-equipped gas car, and the heavy one making it easy to drive with one pedal. The extra weight doesnÂ’t hinder handling. In fact, there may be some incremental improvements, as the electric Mini has a 50/50 front/rear weight distribution, better than the front biased gas Minis.

Mini Electric Pacesetter will lead Formula E, hints at future JCW cars

Just a few days ago, Mini teased a wild electric hatchback with pace car-style lights. And just as we expected, it's the new safety car for Formula E. It's called the Mini Electric Pacesetter inspired by JCW, which is a mighty long name for such a little car. It looks like a blast, and although it's not exactly a production car or the direct forebear of a car that will be offered, it does hint that there will be high-performance electric Minis. Don't just take it from us, take it from the man in charge of Mini, Bernd Korber: "But it does reveal one of the directions we could take with the electrification of the JCW brand. For me, the message is clear: Electrification and John Cooper Works are a good fit." Mini made some major modifications to the Pacesetter to get it ready to lead race cars. It weighs 287 pounds less than the Mini Cooper SE that it's based on, giving it a total weight of 2,712 pounds. Much of that weight loss comes from the gutted interior, which now has a welded-in roll cage, race seats and six-point harnesses. While not particularly related to weight saving, the seats also have a neat 3D-printed material for the cushions that can be made in different colors and densities. The electric motor and battery are unchanged at 181 horsepower and 199 pound-feet of torque, but the weight loss means that it hits 62 mph in 6.7 seconds, an improvement of 0.6 over the road car. Handling and braking are upgraded with racing coilovers that have adjustments for compression, rebound, camber and ride height, as well as four-piston brake calipers. Mini John Cooper Works GP forged four-spoke wheels are fitted with 245-mm Michelin Pilot Sport tires. The wider track from the wheels necessitated the unique 3D-printed carbon fiber fender flares. The rear wing, which is similar but not identical to the GP unit, is also made of 3D-printed carbon fiber material. Splitters, side skirts and a large rear diffuser round out the aerodynamic tweaks. The car will make its racing debut at the Formula E event in Rome on April 10. And we hope we won't have to wait too long for an electric John Cooper Works model to reach the public. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

David Brown Automotive remasters classic Mini at maxi price

Just days ago, we reported that the British small-scale maker of luxurious, Aston Martin inspired coupes, David Brown Automotive, was about to introduce a new, cheaper vehicle positioned under its exquisitely priced Speedback GT model. Since the Jaguar-based Speedback GT costs a significant $753,000, there's quite a bit of room underneath it to introduce a more modest means of transport, without cheapening out. Now, details of the car, dubbed "Project 2," have surfaced, and it's quite a surprise. What David Brown Automotive has come up with is a "remastered," rethought classic Mini. While the car looks just like a Mini at a passing glance, the body panels along with the chassis are new, and the car has been given a smoothening. All the body seams that were commonplace on the classic original have been rounded off, and the interior is a custom job complete with plentiful leather and Pioneer touchscreen. The new dashboard is a little closer to Japanese retro cars than either the classic Mini or the current, BMW-made equivalent. The drivetrain remains the trusted 1,275cc original along with a four-speed gearbox; both are reconditioned units instead of box-fresh ones, but they feature brand-new parts. There's 79 horsepower on offer, which is plenty of poke for a Mini. Each of the cars will take about 1,000 hours to make, by hand. The plan is to build 100-200 of these Mini re-creations per year, at David Brown's new facility in Silverstone, England. In two years, only 11 Speedbacks have been built, so the Mini should create a bit more buzz at the workshop. But the price? Starting from $62,000 at current rates, going all the way to $86,000 if you want one with all the trimmings. A lot for a Mini, but it's going to be special. Related Video: