2007 Mini Cooper Convertible 2dr S on 2040-cars

Auto blog

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Next Mini Countryman spotted with swirls

Mini is continuing to update its models onto its latest UKL front-wheel-drive platform that it shares with parent BMW. Here, our spies caught an early glimpse of the next-gen Countryman testing on the new chassis.
Like the rest of the updated Mini lineup, the latest Countryman doesn't exactly show a huge shift in styling from the current version. The front end appears to be slightly more blunt, and the headlights have a redesigned shape. However, behind the A-pillar the differences seem to be pretty subtle. At the rear, the new Countryman also looks to adopt the brand's rounded rectangle taillights protruding into the hatch like on the standard Cooper Hardtop range. While not shown here, our spies claim that Mini is also aiming for a roomier interior for the upcoming crossover so that it can be more competitive in its class.
At least for now, the Countryman is going to be the largest vehicle in the Mini range, according to an earlier statement from chief designer Anders Warming. The CUV is rumored to debut around 2016 with some assembly possibly done at Mini's plant in the Netherlands. Until then, have a look at these spy shots and tell us what you think.