2006 Mini Cooper Gp on 2040-cars

Auto blog

2020 Mini John Cooper Works GP laps the 'Ring in under 8 minutes

Mini used the occasion of the Nurburgring 24 Hours race to show off a preproduction version of its upcoming John Cooper Works GP. That's fitting, because the GP — the hottest of Mini's hot hatch offerings — has been honed specifically to conquer the Nordschleife of the famous German track. In fact, Mini says it has already lapped the North Loop in under eight minutes. An official lap time will come later because testing is apparently still underway. But to put that time into perspective, the last version of the JCW GP lapped the 'Ring in 8:23, so the new version could be half a minute faster. That's impressive, even if track performance isn't always the ideal measuring stick for street cars like the GP. We know that the GP will have more than 300 horsepower, but exact power figures have yet to be released. As you can see in the image gallery above, it will have some crazy aerodynamic additions, but probably won't wear a Nurburgring-inspired camouflage wrap when it goes into production in 2020 with a limited run of 3,000 units. And now we know that it will be much faster round the 'Ring than the previous GP — but will it be faster than the lap time of 7 minutes and 43.8 seconds recorded by the Honda Civic Type R? We'll see, but we wouldn't be surprised.

Mini reveals it's developing an electric John Cooper Works model

We at Autoblog are extremely fond of the Mini Cooper SE electric car. So we're also excited to learn that Mini is also developing an electric John Cooper Works model. Unfortunately, that's all Mini has actually said about a future electric John Cooper Works model: that it's in development. Anything else about it, such as how hardcore it will be, or what motor it will use, is entirely up for speculation. All we have to go on are photos of the prototype. From the looks of it, the prototype is simply a Mini John Cooper Works (JCW) GP, but with an electric powertrain. The entire body, even the giant wing and funky fender flares, is the same as the uncompromising GP, except for the grille. The grille is the mostly solid example used on the Cooper SE. There aren't any tailpipes on this car either, for obvious reasons. This certainly suggests Mini is planning a mean electric JCW, and not just a slightly stiffer upgrade from the S/SE models. It raises big questions about the motor, though. The gas-powered GP is the most powerful production Mini in history with over 300 horsepower. Only one BMW motor has been used in a Mini so far: the base i3 motor, which makes 181 horsepower. The i3s has a punchier motor that makes 195 horsepower that would probably drop in easily, but it wouldn't seem powerful enough for a GP-type car. Perhaps the iX3's motor, which makes 286 horsepower, could fit? It would certainly be near enough to the GP's engine. Maybe even one of the motors from the dual-motor, 500-horsepower BMW iX would do the job? We'll just have to wait and see, and it's hard to say just how long, since Mini gave no information on reveals. Hopefully it won't be too long if the company is testing minimally camouflaged electric GP prototypes. Related Video:  

Next-gen Mini Hardtop spy shots show dramatic changes

We've seen the next-generation Mini Hardtop a few times, but under significant amounts of vinyl camouflage. But apparently Mini got careless, and someone snagged photos of a completely undisguised prototype, which were shared by Twitter user Greg Kable. While the front end is a pretty predictable update, the rear end and interior are major departures. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The face will be familiar to anyone who has seen a current Mini. The grille is quite large and composed of a large contrasting frame and a body color filler in the middle, with a couple small openings at the top and bottom. It does appear to be a bit smaller overall compared to the current model, and with a thinner frame. The headlights are still round as ever, but appear a bit larger, and now they feature little lines at the top and bottom that almost look like cute eyelids. Interestingly, the hood no longer has holes cut out for the headlights, and the cut lines are higher up. The profile, as far as we can tell, is still typical Mini. The only real change there is the replacement of the pull handles with flush-fitting units. At the back is where the major exterior changes take place. The lozenge-shaped taillights of the past are gone in favor of angular trapezoidal units. They feature black-lined overlays, and they blend into the black trim piece that stretches across the hatch. The lights appear to be a part of the hatch, too, and will likely swing up with the hatch when opened. The rear fenders look wider than before relative to the greenhouse, giving this new Mini a lower, wider appearance. This particular prototype has an S badge in what looks like a yellow-green color, so we believe this may actually be an SE electric model. Moving to the inside, the new Mini holds on to some classic design cues, but reimagines them with modern technology and a minimalist theme. The dash is dominated by a huge, thin circular display, which evokes past round displays and gauge clusters from classic and more modern Minis. There's no gauge cluster in front of the driver, either, so the center screen will likely feature driving information in addition to other infotainment functions. The driver does at least get a head-up display, so there will still be the ability to have speed and other info directly in front of the driver.