2010 Mini Cooper Clubman S Coupe**prem/sport Packs**works Tuning Kit**pano Roof* on 2040-cars

Auto blog

Mini Cooper Convertible Interior Review | Dissecting the oddball

Stepping inside any Mini product is going to throw you for a minute if you haven’t been in one before. ItÂ’s a combination of the odd proportions, weird sightlines and exceedingly quirky design for just about everything inside the cabin. This strangeness, of course, applies to the 2022 Mini Cooper Convertible, which is the subject of this review. Arguably, the Convertible is even weirder than the regular Hardtop, both of which were updated for 2022. It features a tailgate as a rear loading mechanism and a soft top that folds like an accordion on top of said tailgate, remaining out in the open and visible no matter its position — thereÂ’s simply no room for Mini to stow it out of sight in a trunk cubby hole. That gives the Mini Convertible an odd look with the top down, and due to the top having to rest on top of the tailgate, it also blocks the driverÂ’s view rearward. You can still see super-tall trucks in the rearview mirror, but putting the top down makes you largely reliant on the side mirrors to see whatÂ’s coming up behind you. To mitigate that, thereÂ’s a middle ground of top deployment that simply rolls the top part of the way back, effectively creating a roof-width sunroof. Those are all rather odd quirks, but our favorite convertible Mini quirk of old is nowhere to be found in the latest car: the Openometer. This little feature was a gauge that simply kept track of how long you spent driving around with the top down. ItÂ’s hard to think of a feature that is any more “Mini” than that one, which makes us all the more sad that the gauge no longer exists to shame those who donÂ’t drop the power-folding roof. Looking past the weirdness, thereÂ’s a regular car interior here that straddles the line between a premium and non-premium car. The $40,350 price of our Mini Cooper S tester signals that this is positioned as a small and sporty premium car, and there are some genuinely luxurious touches. The Chesterfield Brown leather seats with white piping and pretty quilting sure do scream luxury, while all of the weighty switches and nicely-damped buttons signal the same. The above said, the standard Mini interior is all leatherette, full of cheap-looking shiny plastic trim and is really slacking when it comes to many features weÂ’d expect would come standard. For example, a base Mini Cooper S Convertible at $28,750 doesnÂ’t have heated seats, proximity entry, auto climate control or an auto-dimming mirror.

2021 Mini Cooper 1499 GT adds sporty, retro attitude to the three-cylinder Mini

When you think of sporty Minis, you probably think of the Mini Cooper S and John Cooper Works models with their (relatively) large turbo four-cylinder engines. But with the 2021 Mini Cooper 1499 GT special edition, Mini is trying to bring a dash of sportiness to the base three-cylinder model. The car's styling and name is inspired by the Mini 1275 GT that was introduced way back in 1969 as a more affordable, but still sporty, alternative to the Cooper S. The number represented the engine displacement in cubic centimeters, as it does on the new 1499 GT. The black paint scheme with gold side stripes is the inverse of the launch color for the 1275 GT. Further adding to its athletic looks are black badges and trim, 17-inch wheels, and John Cooper Works-style front and rear bumpers, side skirts and hatch spoiler. The interior also picks up an array of John Cooper Works parts including the steering wheel, seats, shifter and pedals. In front of the steering wheel is the digital instrument cluster from the John Cooper Works GP. Mini also adds a few equipment upgrades found in upper-trim Cooper Hardtops such as dual-zone automatic climate control, automatic lights, automatic wipers, a 6.5-inch infotainment screen and navigation. What the 1499 GT doesn't get are any performance upgrades. The turbocharged 1.5-liter three-cylinder makes the same 134 horsepower and 162 pound-feet of torque as its Cooper siblings. It comes standard with a six-speed manual transmission, and a seven-speed dual-clutch automatic is available as an option. The suspension is unchanged as well. Still, we've found that the base three-cylinder Mini is a thoroughly entertaining car to drive. To pick up one of these special edition Minis, you'll need to fork over $27,890. That's about on par with the Mini Cooper Signature trim, so it isn't completely unreasonable to pay that much for a three-cylinder Mini. But buyers looking for a sporty Mini might be tempted to skip over the 1499 GT for the more powerful Mini Cooper S, which starts slightly less at $27,250. Related Video:

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.