1995 Mercury Grand Marquis Ls Florida Edition on 2040-cars

Auto blog

Ford recalling 370,000 Crown Vic, Grand Marquis and Town Car models

The Detroit News is reporting that Ford will recall some 370,000 Crown Victoria (pictured), Mercury Grand Marquis and Lincoln Town Car vehicles from model years 2005 through 2011, for an issue regarding the lower intermediate steering shaft. 355,000 of the vehicles in question were sold in the US, with the other 15,000 sold in Canada.
The report indicates that corrosion of the lower intermediate steering shaft could cause a "loss of steering," presumably because of a partial or complete failure of the part. The report points out the dealers will inspect and replace the offending steering component for recalled cars, and may also secure a lower steering column bearing and replace the upper intermediate steering shaft as needed. The company is unaware of any reports of the faulty part causing any accidents or injuries.
Ford helpfully lists states in which corrosion is more likely to have taken place, mostly in the Snow Belt, as you might guess. Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, Wisconsin, West Virginia, and the District of Columbia are listed.

Junkyard Gem: 1973 Mercury Marquis Brougham 4-Door Pillared Hardtop

Ford's Mercury Division debuted the Marquis in the 1967 model year, as a sporty coupe based on a stretched Ford LTD chassis. When the LTD got an update for 1969, so did the Marquis, and production of that generation of the top-of-the-line Mercury continued through 1978 (the Grand Marquis hit streets the following year). The 1969-1978 Marquis was a big, imposing land yacht, and the Brougham version came absolutely loaded with affordable luxury. Today's Junkyard Gem is a Marquis Brougham from the first year of the Malaise Era, found in a Phoenix self-service car graveyard recently. This car appears to have spent decades sitting outdoors in one of the harshest climates in the country, and so it's in rough shape. The vinyl top received the full thermonuclear treatment and is mostly obliterated by now. The interior got thoroughly cooked as well. Still, its original opulence shines through if you use some imagination. What hurts is that this car was packed with most of the good options, including the mighty 460-cubic-inch (7.5-liter) V8 engine with four-barrel carburetor. The price for the 460 was just $76 in this car, or around $548 in today's money. The base engine was a 429 (7.0-liter). Power numbers were way down for 1973 when compared to a couple of years earlier, partly as the result of tightening emissions standards but mostly due to the switch from gross to net power ratings that began midway during 1971 and was completed by the end of 1972. This engine was rated at 202 horsepower and 330 pound-feet. The only transmission available was a three-speed automatic. We can assume that the original buyer of this car and its single-digit fuel economy had a rough time when the OPEC oil embargo hit in the fall of 1973. Believe it or not, air conditioning was not standard equipment on the '73 Marquis Brougham (you had to move up to a Lincoln for that). This one even has the automatic temperature control feature, adding a total of $508 to the cost of this car (about $3,661 in 2023 dollars). That AM/FM/8-track radio—or, in fact, any radio—was an extra-cost option as well, with a price tag of $363 ($2,616 after inflation). The MSRP for the 1973 Marquis Brougham sedan (known as a "pillared hardtop" thanks to the frameless window glass) was $5,072, which comes to $36,555 in today's dollars. Obviously, its out-the-door cost would have been much higher with all the options.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.