Mercedes Sl63 Amg Mint Cond Palm Beach Car No Reserve on 2040-cars

Auto blog

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

2016 Canadian Grand Prix: A tale of 3 starts and 2 stops

The first curve in the Canadian Formula 1 Grand Prix happened before Turn 1. Lewis Hamilton sat on pole in the Mercedes-AMG Petronas, Sebastian Vettel in a Ferrari behind. That order changed as soon as the lights went out. Hamilton and teammate Nico Rosberg started well enough, but Vettel flew off the line, passing Hamilton in just a few meters. Vettel led through Turn 1 while Hamilton defended against Rosberg trying to pass on the outside by using the entire track. Hamilton bumped his teammate, sending Rosberg into the concrete runoff with an " infuriating but fair" maneuver Hamilton blamed on understeer. The Brit stayed second, his teammate fell to ninth by the time he rejoined the circuit and got back on the gas. The Ferrari finally looked an even match for the Mercedes, Vettel slowly building a gap out front. On Lap 11 the Honda in Jenson Button's McLaren self-ignited just after the hairpin, forcing Button to pull over on the Casino Straight. A Virtual Safety Car slowed the field, convincing Ferrari to pit its drivers. Vettel came in, handing the lead to Hamilton. The marshals cleared Button's car more quickly than expected, so the scuderia didn't get the full time advantage it expected, sending Vettel back on track seven seconds behind the Mercedes. Button's and Ferrari's unplanned stops decided the race. Ferrari had always planned to run a two-stopper, but the early pit didn't give the team a chance to gauge the ultra-soft Pirelli. The ultra-softs lasted longer than anyone expected. Hamilton only pitted once, Vettel had to pit again, and the Ferrari simply couldn't close the gap to the Mercedes even with newer tires. Post-race commentary accused Ferrari of two blunders: giving up track position, and not taking advantage of Mercedes' only known weakness of not being nearly as good in dirty air. If the ultra-softs had fallen off a performance cliff, however, Ferrari's play would have been considered daring and brilliant. Hamilton took his second win of the season, followed by a hard-driving Vettel five seconds later. Valtteri Bottas and Williams got everything right, the Finn taking advantage of a one-stop strategy, a perfectly-timed pit stop, and more unusual Red Bull issues to finish third. It's Williams' first podium of the year. Max Verstappen claimed fourth after two pit stops, holding off a frustrated Rosberg who had to make an unscheduled stop to remedy a slow puncture.

Erebus Motorsport Mercedes E-Class V8 Supercar completes the field [w/videos]

Ford, Holden and Nissan introduced their V8 Supercar challengers a while back. Erebus Motorport, whose racing program got the green light not even 120 days ago, has finally shown off the Mercedes-Benz E-Class racer that will complete this year's field of entries. The first AMG race car ever to be built outside of Germany, it's an Australian-built tube-frame chassis specced to the series' Car of Tomorrow rules, fitted with body panels that channel the E63 AMG.
Supported by AMG Customer Motorsport, the 5.0-liter engine is provided by HWA in Germany, the racing arm of AMG. Regulations dictate that it have roughly 650 horsepower, a redline between 7,000 and 7,500 rpm and a torque curve that matches the parity baseline set for all cars.
Lee Holdsworth, Tim Slade and Maro Engel will drive the three team cars, each with different sponsors. Their first showing will be at the Clipsal 500 on March 3 in Adelaide, here in the US we'll get to see them in May at the Circuit of the Americas. Check out the videos below of the Erebus car starting up at its launch, and footage of all of this year's cars doing pre-season testing on track together.