Ml-350 4 Matic on 2040-cars

Auto blog

Mercedes C-Class Coupe due to go on sale next December

While we expect to see the coming Mercedes C-Class convertible sometime next year, perhaps at the Paris Motor Show, Auto Motor und Sport reports that the C-Class Coupe will go on sale in December 2015 (probably in Europe first) - it's possible we'll see it debuted at the same time as the cabrio. The German magazine says the two-door will have sharper lines on a body that is four inches longer, almost two inches wider and a fraction of an inch lower than the sedan, dimensional aggrandizement that will be put to good effect on the AMG version coming in 2016. We'll have to wait for information on powertrains, which should hew to the sedan's lineup in addition to whatever else M-B might bring over here, topped off by the 503-horsepower, twin-turbo V8 in the AMG variant. Speaking of which, the 'last-generation' C63 AMG Coupe is still on sale until spring of next year, if you're a fan of the classics. Or you can wait on news of the C-Class four-door coupe, if niches inside of niches are what you're really after.

Mercedes releases 6x6 G63 AMG specs and pics [w/video]

Mercedes-Benz has finally dropped full details on its insane G63 AMG 6x6. The machine puts 544 horsepower to all six wheels thanks to a twin-turbocharged 5.5-liter V8. A seven-speed gearbox shuttles power to the ground via three sets of portal axles, which helps give this machine a full 15.75 inches of ground clearance. By comparison, the standard G63 AMG sits with just 8.27 inches of ground clearance. The extra lift allows this 6x6 to ford nearly 40 inches of water and run massive 37-inch tires. All told, there are five differential locks on this thing, all controlled by a special "locking logic" that provides the best traction possible for any given situation.
The controls offer up three stages of locking, which we can only assume range from JKLOL to OMGWTF. Right now, AMG says this monstrosity is only a show vehicle, but we imagine it wouldn't take much to convince the team to whip up one of your very own. Check out our full gallery and the press release below for all the nitty gritty. While you're down there, you can also check out the video on the machine one more time.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...