2023 Mercedes-benz Eqs 580 4matic® - $140,890 Msrp on 2040-cars

Auto blog

Mercedes G 500 4x4 is mighty mean and bright lime green

The Mercedes-Benz G500 4x42, finally ready to meet the crowds at the Geneva Motor Show, might just be the best factory-prepped expedition off-roader on the market, should Mercedes choose to build it. The short story is that some well-heeled admirers of the G63 AMG 6x6 said, "It's nice, but can you take it down a notch?" And by "notch" they meant "an axle." So the G500 4x42 gets just two portal axles instead of three, and a slew of other features. The 4x4 squared offers up a standard G-wagen body, but instead of the 5.5-liter twin-turbo V8 from the G63, there's a new 4.0-liter twin-turbo V8 with 422 horsepower and 450 pound-feet of torque. Compared to the standard G500, the track is 11.8 inches wider, the street-cred rims being 22-inchers on 325/55 R-series tires. When it's time to get dirty, they can be swapped for an optional set of 18-inch wheels with 37-inch beadlock tires. With that setup and the same wheelbase as the G500 LWB, ground clearance and fording depth are more than doubled to 17.7 inches and 39 inches respectively, the angle of approach goes from 36 degrees to 52 degrees and the angle of departure leaps from 27 degrees to 54 degrees. Breakover angle is bumped from 21 degrees to 47 degrees, a two-piece stainless steel undertray protecting the sensitive bits when you push it. The only parts that get a raised eyebrow are the carbon fiber wheel arches and bumpers, which might behave badly when they meet an immovable granite object. To escape the sensation of driving the Taj Mahal in urban environments, there's a twin spring-and-damper setup at each wheel. One of the spring-damper combos is electronically controlled and adjustable, and when called into action via the Comfort or Sport mode, takes control of wheel action; even when passive, it will kick in to automatically to stiffen the body if it detects evasive maneuvers. On top of all that, to remind you that you're in a Mercedes the interior is fitted out with Designo leather trim and diamond-quilted microfiber. Mercedes is going to gauge its Geneva reception before deciding to build it, a hurdle we're sure will be overcome. Car and Driver drove it and verified it's the real deal, with pricing - if it's built - speculated to land between the G63 AMG and G65 AMG. The press release below has all the details. Related Video: Near-series show car G 500 4x42: The G-Class Squared Stuttgart, Feb 21, 2015 -- Only a G-Class can be better than a G-Class.

2015 Mercedes C-Class owners reporting bleeding seats [UPDATE]

UPDATE: Daimler AG became aware that, in a small number of individual cases, it is possible for temporary spots and/or shiny patches to form on the man-made leather surfaces of the 2015 C-Class in sub-freezing temperatures. No accidents or injuries have been reported, and we have no reason to believe that there are any hazards to customers. Replacement parts are expected to start shipping to dealers by next week. Owners of the 2015 Mercedes-Benz C-Class are learning the hard way that you don't necessarily want to buy a new vehicle in its first model year. Besides reports of poorly fitting taillights and faulty infotainment touchpads, a number of reports are popping up on the forums of MBWorld.org claiming that the compact luxury sedan's seats are, for lack of a better term, bleeding. Owners of US-built, 2015 C-Classes fitted with MB Tex vinyl interiors are reporting a white, oily, shiny residue discoloring their seats that shows up, often after cold cars are quickly heated. It's important to note that this residue is not necessarily staining the seats permanently – warm, soapy water is often all that's needed to restore the original finish. In other cases, the residue disappears of its own accord, only to reappear in an entirely different pattern. That doesn't make things any more acceptable to owners, many of whom have reached out to Mercedes with complaints. It's not clear how many vehicles are affected, but there are a sizable number of forum threads on the issue on MBWorld alone, and the problem is prevalent enough that Mercedes has issued a technical service bulletin to its dealers. According to the forum postings, the TSB instructs service technicians to replace the headrest and seat cover (except for the front, passenger-side seat bottom because of "factory calibration issues") in affected customer vehicles. New C-Class models in dealer inventories, meanwhile, are to get the soapy water treatment if they're showing signs of the residue. Neither one of those moves seems to represent a long-term fix, though. Black MB Tex seats – both the standard and sport variety – seem to be particularly susceptible to the residue, although we stumbled across at least one image of what looks like Silk Beige MB Tex with speckles of residue.

Mercedes was set to sell version of Nissan Titan, now Infiniti might instead

Mercedes-Benz Titan. Mercedes-Benz Frontier. Mercedes-Benz pickup truck. None of these things roll off the tongue particularly well. We'd like to think that's the reason Daimler opted to kill the idea of rebadged Titan and Frontier pickups from corporate ally Nissan. In reality, the execution before the Frankfurt Motor Show was due to more complicated issues.
Yes, Mercedes, byword for German luxury, style and quality, would have slapped a three-pointed star on a pair of Japanese pickup trucks that have failed to resonate with consumers in the world's largest truck market. That slapping of badges isn't much of an exaggeration, at least on the outside. According to the report from Road & Track, the truck's front clip would have been tweaked, but beyond that, the sheetmetal would have been unchanged. The interior would have received a more thorough going-over by the team at Mercedes, while the suspension and noise, vibration and harshness tuning would have also received significant attention.
The trucks would have ended up being sold through the light-commercial branch of Mercedes-Benz - the same folks that will happily sell you a Sprinter van - had the deal gone through. Issues arose, though, first with the engines. Mercedes wanted a wider range of powertrains to allow it to tune models for specific markets, while Nissan said it couldn't engineer the wide variety of engines that MB wanted to drop under the hood. For the smaller truck, meanwhile, MB was interested in a hybrid or plug-in variant, according to R&T, although this was also shot down by Nissan.