2004 Mazda Rx-8 Touring Sunroof Spoiler Xenons Auto Clean Carfax on 2040-cars

Auto blog

Aussie Mazda MX-5 Miata specs leak suggests power loss

Mazda's 2016 MX-5 Miata reveal didn't include much in the way of specifications, but the car's debut seems to have blown the lid off of the rumormill, with the latest word out of Australia including fresh claims of curb weight and engine output.
Before delving into the findings from Motoring.com, we're going to take a moment to find a few grains of salt. It's not that we don't trust the Oz publication, it's just that we wouldn't be surprised to learn their car's specifications will vary from that of our eventual North American car.
Of course, we don't expect the footprint of the new ND model to itself to differ much - it will still be the most compact Miata ever - overall length is expected to check in at just over 154 inches - that's about 1.4 inches shorter than the original NA Miata and over 4 inches shorter than today's NC generation, yet it'll ride atop a longer wheelbase and be slightly wider while sitting lower to the ground.

Mazda considering a 'hyper' Mazda3 with the 250-hp 2.5-liter turbo four

Mazda boss Akira Marumoto said last year there'd be no Mazdaspeed version of the new Mazda3 because the hot hatch segment wasn't a priority for the carmaker. Then Mazda engineer Dave Coleman told Road & Track that without "an engine on the shelf that would fit properly," an MPS variant made no sense. The first reader comment on our Coleman post read, "Engine — you have it; cue up the 2.5T." Mazda might have been listening. Program manager Kota Beppu told Autocar he'd like a "hyper" Mazda3, the outlet figuring the 2.5-liter four-cylinder turbo would make the most sense for power. Autocar wrote "the project had not been officially signed off, [but] insiders suggest that is a formality." When Car and Driver queried Mazda and its sources about the report, the magazine realized "the company is seriously considering a high-performance hot hatch." What's more, "Drew Cary, senior manager for brand communications, said, 'We encourage people to ask for it, though. Our planners and executives are watching and listening to fans.'" The turbocharged 2.5-liter SkyActiv-G four-cylinder — which doesn't sell in Europe — makes 250 hp on premium gasoline and 310 pound-feet of torque in the Mazda6, CX-5 and CX-9. A next-generation SkyActiv-G is predicted on the way next year, bringing more boost and power. Even as is, we're talking a chunky lump of power to send to the front wheels, and Beppu mentioned torque steer. The new Mazda3's all-wheel drive would alleviate that bugbear. Unlike the raw, fast-twitch reflexes of the last Mazdaspeed3 from 2013, Beppu says a new model "needs to be responsible and friendly ... more friendly than a Golf GTI." And, "It should be fast." The polished looks and interior address the necessary perceptions. CD's done the math on the current 2.5-liter and predicts a five-second sprint to 60 miles per hour, which is Volkswagen Golf R and Honda Civic Type R territory, so GTI comparisons could be a case of aiming low. Imagine a 300-hp engine with a touch more torque and a six-speed manual ... If Mazda follows through with such a product, it could take two years to get the green light. However, we're told that Mazda's Los Angeles research and development center has already built a proof-of-concept to encourage and anticipate that green light.

Toyota/Mazda factory will reportedly be in Alabama or North Carolina

The Toyota/Mazda factory sweepstakes appear to be nearing a conclusion as Bloomberg and Automotive News are reporting the location has been narrowed down to either North Carolina or Alabama. The joint venture plant worth $1.6 billion would add 4,000 jobs to whichever state lands it. To even be considered, Toyota and Mazda have reportedly sought a $1 billion incentive package from interested states in the form of tax breaks and other support. At least 15 states had apparently been jockeying for the factory, including Mississippi, Illinois, Michigan, Ohio, Indiana, Texas and South Carolina. Toyota presently has an engine factory near Huntsville, Ala. The state is also currently home to Honda, Hyundai and Mercedes-Benz assembly plants. North Carolina currently does not have a car manufacturing plant. This would also represent Mazda's return to American manufacturing, as its present lineup of cars and crossovers is produced in Japan. The company had previously built cars in the United States along with its former partner Ford. Related Video: