2004 Mazda Rx-8 Sport 6spd Manual Coupe Xenon Headlights Fog Lamps 18" Tires on 2040-cars

Auto blog

Fiat 124 Abarth Spider spied, may get Alfa 4C power

We've long been excited to see, hear, and drive the car that results from the in-process Fiat-Mazda partnership. The Italian brand has had access to the excellent 2016 Mazda MX-5 Miata on which to base its own roadster, and the fruits of that labor will soon ripen. Spied here is not only the ensuing Fiat 124, but a hotter Abarth tuned version of the spider. At least, that's what we're hoping. Our spy shooters indicated that the car seen here not only sounded more aggressive than 'standard' 124 mules seen previously, but that it also accelerated away from their long lenses with a smartness. The 124 Spider is already rumored to make use of the 1.4-liter turbo I4 that makes 160 horsepower in the Fiat 500 Abarth, and this version may have a still-more-powerful engine. Another tell about the added output are the quad tailpipes in place of the lesser car's set of two. There's no hard evidence to support exactly which engine might be under the 124's hood, however. It's possible that the 1.7-liter turbo from Alfa Romeo 4C could be in play – with its 237-hp output – as the 124 was originally going to wear an Alfa badge. If that were to happen, however, the Fiat would almost certainly get a dual-clutch transmission instead of the purer manual box. In any event, more details about the car will no doubt crop up closer to the expected reveal this fall. Related Video:

Mazda Mexico debuts Mazda3 Turbo before official U.S. reveal

We should have been keeping an eye on our neighbors to the south, who did us the favor of showing off the turbocharged 2021 Mazda3 last week. The automaker teased the reveal for the U.S. market to happen on July 8. It's reasonable to expect slight changes between our two countries, but the Mexico introduction makes a good base to know what we're getting. The prime specs: 2.5-liter Skyactiv-G turbocharged four-cylinder with 227 horsepower and 310 pound-feet of torque. As suspected, this is the same engine found in the Mazda6, CX-5, and CX-9. As such, we expect those output figures are based on using 87 octane gasoline; in the other three Mazda offerings, 93 octane gas unlocks 250 hp and 320 lb-ft. So at worst, the Mazda3 turbo makes 41 hp and 124 lb-ft more than the naturally-aspirated engine in the current hatch and sedan. At best, the improvement runs to 64 hp and 124 lb-ft. Comparing the turbo Mazda3 to the segment-standard Volkswagen Golf GTI, the incoming 2021 German will make 241 hp and 273 lb-ft. Only a test drive will reveal how the battle of sportiness vs luxury turns out for the Mazda. The numbers make a case for the former, but there's enough of the latter to sway us into believing this will primarily be a quicker Mazda3, with nary a hardcore edge. The only transmission mentioned is a six-speed automatic with paddle shifters that sends power to both axles via mandatory all-wheel drive. In Mexico there are only two Mazda3 trims, which start at 329,990 pesos ($17,050 U.S.) and 429,900 pesos ($19,294 U.S.). The turbo will introduce two new trims there that start at 489,900 pesos ($21,987 U.S.) and 529,900 pesos ($23,782 U.S.), MSRP increases of about 29%. For the supplemental dosh, the Mazda3 turbo in Mexico comes with a leather interior, sunroof, 12-speaker Bose audio, Android Auto and Apple CarPlay, LED headlights, blind-spot monitoring and auto-tint side mirrors, reversing sensors, and black 18-inch aluminum wheels.  Other than those black wheels and some badging, though, there's nothing to differentiate the forced-induction model from the naturally aspirated one. When a Jalopnik source tipped that site to some 2021MY Mazdas based on dealer codes, there was a "MAZDA3 HB PP TURBO." That "PP" likely stands for Premium Package, which is the highest trim offered on our Mazda3 right now, already comes with 18-inch black wheels, and starts at $28,445 after destination.

Next-gen Mazda MX-5 could use carbon fiber to cut weight

The current Mazda MX-5 Miata has only been out for a few years, but the automaker is allegedly looking for ways to lighten the next one. According to a report from Autocar, Mazda is looking to carbon fiber to help the next-generation MX-5 cut weight and use a smaller engine. Despite having more safety features, modern amenities, and a stiffer body, the current MX-5 is the same size as the original sports car from 1990 and weighs less than its immediate predecessor. In a recent interview with Autocar, Nobuhiro Yamamoto, head of the Miata program, revealed that the next generation of the Miata will probably stay the same size, but could be even lighter thanks to the utilization of carbon fiber. The current MX-5 uses high-strength steel and aluminum, and Mazda doesn't use carbon fiber in any of its cars. Carbon fiber is expensive to incorporate into road-going vehicles, and so Yamamoto notes that Mazda has been hard at work making it more affordable. A lighter car could result in a smaller engine, Yamamoto said. In the US, the MX-5 comes with a 2.0-liter four-cylinder engine that makes 155 horsepower, while the Japanese and European version comes with a 1.5-liter, 130-hp engine. A smaller engine would make the sports car even lighter. It's unknown at this time if the automaker is collaborating with another automaker or a supplier to make produce carbon fiber, or if it'll make it in-house. There's no word on how much carbon fiber the next MX-5 will wear or how it will affect the sports car's price. Autocar reports that the next MX-5 won't arrive anytime before 2021, which could make the ND MX-5's lifespan an unusually short five years long. With cars getting heavier, it's nice to hear that Mazda is working on finding a way to make its lightweight sports car even lighter. Related Video: News Source: AutocarImage Credit: Mazda Mazda Convertible Coupe Lightweight Vehicles