2004 Mazda Rx-8 Base Coupe 4-door 1.3l on 2040-cars

Auto blog

Honda, Mazda, Mitsubishi, Mercedes also under diesel emissions scrutiny

The controversy over Volkswagen's diesel emissions scandal isn't limited to the US. In Europe, where diesel engines are far more popular, the issue is shining a harsh light on the NEDC emissions test. As already known, the evaluation does a poor job of reflecting real-world production of NOx, and it appears a significant number of automakers are affected. The Guardian in the UK has been reporting on real-world test results from a company called Emissions Analytics. After the latest round of checks, vehicles from Mercedes-Benz, Honda, Mazda and Mitsubishi were found to generate far more NOx than they should. The newspaper also published similar results for Renault, Nissan, Hyundai, Fiat, Volvo, Jeep, Citroen, VW, and Audi. On average, the figures are about four times over the limit of producing the pollutant. Unlike VW and its defeat device, these automakers aren't actually breaking the rules. The vehicles perform up to the NEDC lab test for emissions, but those results simply aren't translated to the street. "The VW issue in the US was purely the trigger which threw light on a slightly different problem in the EU - widespread legal over-emissions," Nick Molden from Emissions Analytics said to The Guardian. A big fight to decide the future of this issue appears to be on the horizon. Automakers claim that they can't meet the next round of tightening emissions regulations and are asking for compromises. Although, spokespeople for Mercedes and Honda told The Guardian that the brands would be in favor of the stricter rules. Meanwhile, some European governments began backtracking their support of diesels well before this scandal came to light. The added scrutiny certain hasn't helped the future of the oil-burner. Related Video:

Flyin' Miata's 525-hp V8-powered ND finally hits the streets

Flyin' Miata, in its valiant quest to turn Mazda's roadsters into small, Japanese Corvettes, has finally finished its first V8-powered ND Miata. The company has been slowly teasing us with images and videos for months, but it wasn't until this week that the car finally made it to the streets. As soon as the current ND generation Miata was released, Flyin' Miata started the work to shoehorn a GM LS3 under the hood. The company has a history of building brutish, V8-powered Miatas. It sells everything from minor parts to full V8 conversion kits. For those with the cash that prefer to avoid the hassle, Flyin' Miata will sell you a complete, turn-key car. The price hasn't been finalized, but customers should expect to pay about $50,000 plus the cost of the MX-5. The new car has a worked-over LS3 that sends 525 horsepower to the rear wheels through a Tremec T56 transmission. Flyin' Miata says the rear differential comes from a V8 Camaro. Other new bits include exhaust, suspension, brakes, and a roll cage. Flyin' Miata tells us that the V8-swapped ND will weigh 2,592 lbs, a little more than 200 lbs more than the porkiest stock Miata. Despite twice as many cylinders and more than three times the displacement of the stock four banger, the LS3 V8 is a relatively small and lightweight engine. The finished car has a 53:47 front to rear weight distribution. Final touches are being finished, but cars and kits should be available soon. This article has been updated with some info straight from Flyin' Miata. Thanks, Keith! Related Video: News Source: Road & Track, Flyin' Miata Mazda Convertible Performance flyin miata

Mazda development chief discusses future rotary platform

The switch can again be flicked from "The Rotary Engine is Doomed" to "The Rotary Engine Lives!" Mazda is re-tooling the once nearly forgotten rotary to work as a range extender for hybrid vehicles, with a chance for it to do even more than that. The latest information sounds rather promising for those still holding out a candle for the rotary. Mazda's powertrain development chief, Ichiro Hirose discussed future rotary plans with the Australian Drive at the CX-30 crossover's launch. Hirose told Australia's Drive that Mazda is currently working with a very flexible and efficient rotary hybrid platform that doesn't necessarily come with the heavy emissions and fuel consumption baggage the rotary engine has earlier been saddled with. Hirose calls the rotary-based solution "XEV," referring to its adaptability. "It has the generator function and also it can be used to provide the drive force to give you traction. [...] Because the rotary engine is compact in terms of its packaging size [and] if we should choose to do so we can have the generator, rotary engine and electric motor all in one [driveline] because of the small packaging." The result is an electrified platform that could be made to work as a mild hybrid, series hybrid or a battery electric vehicle with a rotary range extender (if given a plug), depending of the required implementation. It's as if Mazda had a slider to adjust the balance of using a rotary engine and using electric power, to make the platform more of a jack-of-all-trades. Hirose explained: "If you reduce the other way around it could be a pure battery-electric, using really the rotary engine as a range extender and, according to the balance, you can even provide something akin to the series hybrid that is providing the drive force. [...] So, we are looking at a wider coverage and scope. Based on this architecture it allows us to do that, to explore the huge range of applications we can have with the rotary." The platform would also be flexible when it comes to meeting various stringent emissions standards. To be able to sell XEV-based vehicles globally would mean introducing a certain setup for one region and one for another, keeping in mind when the rotary power would kick in and how. While Hirose keeps the question open whether these vehicles would make it for sale in the United States, he says Mazda would be able to make them pass U.S regulations. "I'm just saying that — theoretically — if we were to introduce it in the U.S.