Find or Sell Used Cars, Trucks, and SUVs in USA

2004 Mazda Rx-8 Base Coupe 4-door 1.3l on 2040-cars

US $3,500.00
Year:2004 Mileage:103000
Location:

Advertising:

I bought this car at an auction so I don't know the cars story other than what the history report shows.  I've driven the car a few hundred miles and it seems to run pretty good.  It does have the abs light on and tire pressure light is on also.  The engine coolant level light comes and goes, but actual level is correct.  I have found out that these cars have common issues you have to work with.  They flood easily unless you shut them down properly (youtube) and I've read you can buy a new starter that either improves or fixes the problem.  And I noticed some white sticky material on the oil dipstick so I looked it up.  People on rx-8 forums say this is condensation and is normal for rotary engines in cold weather and will go away in warmer weather.  The car has a few body lines that don't line up correctly, probably from the minor collision the vehicle report states.  It is a decent looking car but it is no means a show car.  It could be nice with a little tlc or could be a great parts car.  Being sold as-is   

Auto blog

Mazda Recalling Cars Due To Spider Webs In Engines

Sun, Apr 6 2014

It seems that Yellow Sac spiders really, really love Mazda. Three years after Mazda recalled 52,000 Mazda6 sedans over spider webs obstructing the evaporative canister vent lines of 2009 and 2010 Mazda6 models, another recall has been issued for 42,000 more of the models built between 2010 and 2012 and equipped with the 2.5-liter four-cylinder engine. According to the automaker, there have been nine confirmed sightings of spiders in vent lines since the original recall. It seems that covers were applied at the factory to keep the arachnids from entering, but it hasn't quite exterminated the problem. A reflash of the ECU is required that "[changes] the logic behind how the car purges the charcoal canister during normal operation," says Jeremy Barnes, Director, Public Relations & Brand Experience at Mazda North American Operations. So far, Mazda has not recorded any fires, accidents or injuries due to this tangled mess of webs. Recall notices will be mailed out to owners later this month. This story original appeared on Autoblog. Related Gallery Utter Driving Delight: The 2014 Mazda MX-5 Miata Recalls Mazda Mazda6

Five automakers now being investigated by NHTSA for airbag woes

Thu, 12 Jun 2014

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."

Flyin' Miata is building a V8-powered MX-5 ND

Fri, Jan 8 2016

It's cold in many parts of the country, but this V8-swapped 2016 Mazda MX-5 Miata that Flyin' Miata is developing has us dreaming about throwing on a parka and taking a very brisk drive. This beast is the product of the talented folks at Flyin' Miata, but we can't get too excited just yet. According to the company's brief Facebook post, this is just a dummy V8, placed under the Miata's hood to confirm fit. Judging by the photo, the engine fits like a glove. "There's still a long way to go before this is a real thing," Flyin' Miata writes, but the company admits everything looks "very promising" so far. The post doesn't mention any details about the estimated specs, but Autoblog reached out to Flyin' Miata for more information about this intriguing build. Keith Tanner, one of the mad scientists who shoehorns V8s into Miatas at the Colorado outfit, told us that Flyin' Miata is looking at both the LS3, which will provide between 430 and 525 hp, and the LT1 which is 460 hp out of the box. A supercharged LT4 is also being considered, but as Tanner put it, "that might be a little nuts" in a car as light as the ND. In any of these engine configurations, Tanner estimates the V8-swapped ND should comfortably be a sub-4 second to 60 mph car. The transmission will be a Tremec T56 Magnum six-speed manual. The suspension, brakes, fuel system, cooling system, and the chassis itself will all be beefed up to handle the power, as per normal FM practice. The one question mark is the rear end, as the ND's existing one simply won't be up to the task of putting that much horsepower to the ground. The 2016 Miata was one of the best cars we drove in 2015, but Flyin' Miata knows how to turn a standard MX-5 into an absolute hotrod with the company's LS3 V8 conversions for earlier models. Imagining the more modern chassis from the latest generation with a massive dollop of more power is an exciting thought. We can't wait to see how this project turns out. Related Video: