2004 Mazda Rx-8 on 2040-cars

Auto blog

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

NHTSA releases updated Takata airbag recalled cars list, but it still has errors

Unfortunately, the government's list still contains errors.
The National Highway Traffic Safety Administration has issued an updated list of vehicle models that it's urging owners to repair under the mushrooming Takata airbag inflator recall. The latest version adds vehicles from new automakers like Subaru and Ford that are missing from the original announcement, and it also removes erroneous entries from General Motors, leaving only the 2005 Saab 9-2X (a reskinned Subaru WRX), and the 2003-2005 Pontiac Vibe, a joint project with Toyota.

Mazda's Hofu plant builds its ten-millionth car

Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.