**only 35231 Miles** 2007 Mazda Rx-8 6 Speed-dealer Serviced & Garaged 2nd Owner on 2040-cars

Auto blog

Reminder: Come hang out with Autoblog and the 2016 Mazda MX-5 Miata on Tuesday, May 19

Do you love chilidogs, French fries, meeting new friends, and the world's most popular convertible? Do you live in Southeast Michigan? Do you like lists of questions? If you answered "yes" to any but the last of those, we'd like to invite you to a little get-together we're hosting next week. Driving impressions are still under embargo for the US-spec 2016 Mazda MX-5 Miata, but somehow we've conned convinced company PR reps to show the car to you, Joe Public Autoblog Reader. We're enthused about telling you more about the ND Miata, but before we do we'd love to share a Coke and talk about cars. Here's the skinny. A group of Autobloggers will be hanging out at the Athens Coney Island, in Royal Oak, MI, next Tuesday, May 19. We'll have the car on display from 5:00 PM to 8:00 PM, and we'd love to see you. If you're a Miata owner, we'd also love to for you to bring your car along for the party. The more convertibles the better (just be prepared to have your picture taken). Go ahead and set your navi for Athens – 32657 Woodward Ave., Royal Oak, MI 48073 ­– and we'll look forward to seeing you Tuesday. Mazda Geeks unite. Related Video:

WAVE 2015: Metron 7 sets new record of 513 miles on one charge

Sometimes you just gotta push harder, faster, longer. Last fall, the Metron Institute team from Slovenia took their converted all-electric Mazda5 minivan on an impressive 457-mile journey from Bled (in Sloveniva) to Dubrovnik (in Croatia) without stopping to recharge at an average speed of 40 miles an hour. Today, as part of the WAVE Trophy 2015, the Metron 7 EV just finished up a drive of 826.1 kilometers (513.3 miles) on a single charge. The drive started in Berlin and ended in Karlsruhe, Germany. As you might suspect, a drive of this length on normal roads required a big battery pack. The total pack capacity was 108 kWh, thanks to the combination of the built-in 86-kWh pack that uses lithium polymer cells from Kokam and a 130-pound, 22-kWh external pack that Metron has developed that can charge the built-in pack while driving. The average speed of the 500-mile journey was 45 miles per hour (72 kilometers per hour) through rural countryside, towns, and some time on the highway. The drivers –Andrej and Jasna Pecjak – did not use air conditioning, but the fans were running. The weather was temperate enough that AC wasn't needed anyway these last two days. The Metron 7 was a part of the last two WAVE events and has been updated since the last record was set in October 2014. On the new record journey, the minivan was loaded up with gear, but the Metron engineers made improvements to the car in the last eight months: the side mirrors are smaller and they fitted a better aerodynamic cover underneath the vehicle, for example. Andrej said that the cost for the batteries was around $50,000, since some of the cells he got were used. Today's record is unofficial, but AutoblogGreen witnessed both the sealing of the charge port in Berlin and was in the car for the last 125 kilometers today. Featured Gallery WAVE 2015: Metron 7 EV Distance Record Green Mazda AutoblogGreen Exclusive Fuel Efficiency Green Culture Electric mazda mazda5 mazda5

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.