1994 Mazda Rx-7 Base Coupe 2-door 1.3l Fd3s Fd Drift Jdm on 2040-cars

Auto blog

50 engineers kept the rotary alive at Mazda for 8 years

The Mazda RX-Vision concept is one of the standouts at this year's Tokyo Motor Show thanks to a drop-dead gorgeous design and a revival of the Wankel engine. The fact that the rotary is still in development at Mazda is thanks to a dedicated group of 50 engineers. According to Automotive News, their dream for the last eight years has been to bring this storied engine design back to the street. It won't be easy. Because of its design, the rotary suffers from poor fuel economy and high emissions. Making the challenge even harder, Mazda reportedly only gives them a small budget, but they continue to chip away at the problem. "These 50 engineers want to develop the rotary engine, therefore they joined Mazda," company research and development boss Kiyoshi Fujiwara told AN. "If I stop the rotary engine, probably they want to leave." For the Skyactiv-R under the RX-Vision's svelte hood, the team reportedly started from the 16X rotary project. Dating back to 2007, that 1.6-liter engine was supposed to improve torque and fuel economy thanks in part to direct injection. After additional development, insiders even suggested that the engineers might have finally solved the powerplant's issues. However, Mazda never put the mill into production, and the RX-8 remains the company's last Wankel-powered model to be offered in showrooms. "We have a dream that one day, this design with a rotary engine will achieve a level that customers will accept," CEO Masamichi Kogai said to AN. Mazda is quite clear that the RX-Vision might never go on sale without a suitable rotary. Although if it does see production, the coupe would likely use a stiffened version of the Miata's chassis, AN reports. Before anyone can place an order, these 50 determined engineers still have a lot of work ahead of them. Related Video:

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video:

Aussie Mazda MX-5 Miata specs leak suggests power loss

Mazda's 2016 MX-5 Miata reveal didn't include much in the way of specifications, but the car's debut seems to have blown the lid off of the rumormill, with the latest word out of Australia including fresh claims of curb weight and engine output.
Before delving into the findings from Motoring.com, we're going to take a moment to find a few grains of salt. It's not that we don't trust the Oz publication, it's just that we wouldn't be surprised to learn their car's specifications will vary from that of our eventual North American car.
Of course, we don't expect the footprint of the new ND model to itself to differ much - it will still be the most compact Miata ever - overall length is expected to check in at just over 154 inches - that's about 1.4 inches shorter than the original NA Miata and over 4 inches shorter than today's NC generation, yet it'll ride atop a longer wheelbase and be slightly wider while sitting lower to the ground.