2013 Mazda Mazda6 S Grand Touring Sunroof Nav Rear Cam! Texas Direct Auto on 2040-cars

Auto blog

2019 Mazda CX-5 Signature AWD diesel unveiled in New York

NEW YORK —It seems like we've been waiting forever, but the wait is finally over. Mazda has finally launched a diesel version of the CX-5 for the U.S. market, unveiled at the 2019 New York International Auto Show. Specifically, the 2.2-liter Skyactiv-D turbo-diesel engine will be offered in the higher-end CX-5 Signature AWD, part of what Mazda calls its "path to premium," as the company continues to set its sights on some of the more expensive competition. The Skyactiv-D 2.2 makes use of a sequential twin turbocharger that employs a smaller turbocharger first at low rpm for quick throttle response, after which a valve opens to spool up a larger turbocharger at higher rpm. Mazda says this provides "smooth and linear response from low to high engine speeds, and greatly increases low- and high-end torque." Mazda estimates the output of the engine to be 168 horsepower at 4,000 rpm and 290 pound-feet of torque from a low 2,000 rpm. The engine has a rev limit of 5,500 rpm. As of right now, it's only in the all-wheel-drive version and only in the Signature trim level. As such, it gets a ho-hum EPA fuel economy rating of 27 mpg city, 30 highway and 28 combined. We previously saw fuel economy figures for a potential front-drive diesel CX-5 getting just slightly better fuel economy, at 28 city, 31 highway and 29 combined, but no word yet on if and when that'll be made available. The mediocre diesel fuel economy, while expected given the midstream shift from one emissions strategy to another, is particularly disappointing in context. The non-turbo CX-5 AWD, which makes 187 hp and 186 lb-ft, gets 24 city and 30 highway for 26 combined mpg – just 3 mpg less in the city and 2 mpg less overall than the diesel. The much more powerful CX-5 Turbo, which makes 250 hp and 310 lb-ft, gets 22 city, 27 highway, and 24 combined. Mazda is taking pre-orders for the 2019 CX-5 Signature AWD with Skyactiv-D 2.2 starting now, at an MSRP of $42,045, including $1,045 in destination fees. We have to point out that this is a sizable jump in MSRP from a CX-5 Signature AWD with the more powerful turbo engine, which lists for $38,235 – a $3,810 difference in fact. Given the lackluster fuel economy and considerable decrease in power and torque, we're concerned that the diesel may be a tough sell at this sort of premium.

Mazda rumored to bring rotary-powered RX-9 concept to Tokyo

Stop us if you've heard this one before: Mazda will bring a rotary-powered sports car to the next big auto show. Okay, so we stopped for a second, but the show must go on. Following an official teaser image (shown above) late last month, Motoring.com.au has what it claims are renderings of the curvy, two-door coupe – called the RX-9 – that Mazda will bring to the Tokyo Motor Show later this month. The images show a far softer styling than Mazda's current crop of Kodo-inspired vehicles, while the overall look screams of a modern-day Cosmo Sport, the Japanese brand's first rotary-powered vehicle. And though that connection alone might be enough to justify whisperings of a successor to the RX-7 and RX-8, Motoring claims there will be an even more overt sign of this concept's power source. "Look to the Cosmo Sport," an inside source told the Aussie website, signaling that the Mazda stand would feature the vintage two-door. "The Cosmo has no earthly reason for being there unless..." The rotary rumor, if it comes true, won't exactly be what we're use to. While Motoring brings up the previously reported 16X – a 1.6-liter two-rotor – it builds on our 2013 report. According to the Aussies, the new engine could feature a two-stage electric turbocharger, be paired with a hybrid powertrain, offer up to 450 horsepower, and we're guessing, be hilariously complicated. Joking aside, it sounds like Mazda's goals here are admirable. A rotary-equipped sports car that could counter the 1.3-liter RX-8 engine's appetite for fuel and improve on its mediocre low and mid-range torque would be interesting indeed. As for those renderings, Motoring has front and rear three-quarter images. Comparing the rear with our original teaser leaves the look open to interpretation, but after seriously upping the exposure on the teaser (thanks Photoshop), the taillights and overall profile shape look to be a spot-on match. In front, the long hood shares some Kodo elements, like the headlights and grille, but its undeniable coupe shape – a long hood and very short deck – are far more organic and, dare we say, calm, than Mazda's other vehicles. You can take a closer look at the renderings over at Motoring's website. Do that, and then head back and let us know what you think of these RX-9 rumors. Is Mazda finally going to be bringing a rotary back to market?

Britain's BBR already promising 2016 Mazda MX-5 Miata with 200+ horsepower

The 2016 Mazda MX-5 Miata is one of Autoblog's most anticipated cars to drive this year, and with good reason. Thanks to svelte, angular styling, the promise of less weight, the possibility of more power and all at a fairly affordable price, it represents pure, automotive enjoyment. Mazda is still not saying exactly how much power the new Miata's 2.0-liter Skyactiv four-cylinder engine will make, but that isn't keeping British tuner BBR from already working out how to squeeze even more ponies from the mill – potentially as much as 200 horsepower with natural aspiration. The company bought a Mazda3 for access to its 2.0-liter Skyactiv and went to work on it. "Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction," said Neil McKay of BBR in the company's release. The 3's version of the engine is rated at 155 hp and 150 pound-feet of torque but is expected to be tuned for additional grunt for the droptop. Still, it gives BBR something to experiment with before the real thing is available. The tuner also got the opportunity to take a look at a pre-production 2016 Miata and is already developing "subtle bodywork alterations" for the upcoming convertible. You can get a taste for the company's plans with the rendering above. It sports tinted lights, a front lip spoiler, lower side sills and a tiny rear spoiler. Scroll down to read more about BBR's plans in the official announcement. BBR UNVEILS STUNNING 200 BHP ALL-NEW MAZDA MX-5 CONCEPT Despite deliveries not scheduled to begin until July, legendary Mazda performance tuner BBR is making great progress with both its visual concept and powertrain development for the all-new MX-5. "A program of detailed performance enhancements has already commenced at our Brackley base," says BBR's Neil Mckay, "thanks to our investment in a 2.0-litre Skyactiv powered Mazda 3. Our objective with the all-new MX-5 is to achieve the same 200 bhp output that we can easily enjoy with simple bolt-on components on the current 2.0-litre NC model, before building on further power upgrades using forced induction." Having viewed a pre-production version of the car BBR is also working hard on visual enhancements to add more presence to the svelte lines of the all-new MX-5.