2012 Mazda Mazda6 I Touring Auto Alloys 1-owner 40k Mi Texas Direct Auto on 2040-cars

Auto blog

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

Mazda CX-30 crossover will have its U.S. debut at L.A. Auto Show

After debuting at the Geneva Motor Show earlier this year, the Mazda CX-30 is ready to relocate to the U.S., and is now preparing to meet its future compatriots at the LA Auto Show. The small crossover — whose name is a workaround due to the Chinese-market CX-4 crossover — is five inches longer than the new Mazda3 hatchback and five inches shorter than the CX-5 crossover. Its appeal is intended to be a mix of high maneuverability and roominess for occupants and cargo, not to mention being the second vehicle in the lineup to adopt the evolved Kodo design language first expressed on the latest Mazda3.  In Europe, the CX-30 offers buyers a range of engines from a Skyactiv-D 1.8-liter diesel to the new Skyactiv-X engine with gasoline compression ignition. Last month, Motor Trend dug up a California Air Resources Board document listing the two engines and two transmissions for the North American market. Our continent gets the 2.0-liter four-cylinder mated to a six-speed manual or a six-speed automatic, and a 2.5-liter four-cylinder mated solely to a six-speed auto. The smaller engine and manual transmission are expected to be reserved for Canadian and Mexican buyers. The U.S. likely gets the 2.5-liter, the engine that makes 186 horsepower and 186 pound-feet of torque in the Mazda3 and 187 hp in the CX-5.  Mazda's i-Activ all-wheel drive is predicted from launch, and safety features should include front cross-traffic alert, adaptive cruise control, and driver monitoring linked to a Smart Brake Support system that cuts the reaction time to issue a the driver a brake warning. The CX-30 will share the Mazda stand with the 2019 Mazda MX-5/Miata RF, refreshed 2020 CX-5 and 2020 CX-9 crossovers, the 2020 Mazda 3, and Mazda3 TCR racer. Anyone with some free time at 1:20 p.m. Pacific Time on November 11 is welcome to stream the press conference at Mazda's YouTube channel.

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.