2009 Mazda Mazda6 on 2040-cars

Auto blog

2019 Mazda 6 gets more expensive, adds equipment and drops the manual

Update: We got wind of what Mazda had in store for the 2019 Mazda 6 in this report from last week, and now we have all the official information from Mazda. The news on the manual transmission's disappearance is still true — 2018 model year cars will be the last ones that make that an option. There are a few changes Mazda has implemented for this model year, and a slight price adjustment that goes with. The addition of Mazda's i-Activsense safety tech as standard is confirmed. As is G-Vectoring Control Plus, the next generation of Mazda's G-Vectoring we saw hit the CX-5 for the 2019 model year. Pricing has been adjusted to reflect the extra standard equipment and elimination of the manual transmission. A base (manual) 2018 Mazda 6 Sport costs $22,845 with its $895 destination fee, but the new 2019 model begins at $24,720 with the $920 destination fee included. That's a considerable increase, but the charge for an automatic transmission was $1,050 of that previously. Higher trim levels don't experience as much of a hike. For example, the maxed-out Signature is only $375 more expensive in 2019, coming in at $36,020 total. Mazda says the 2019 Mazda 6 goes on sale this month. It's a little surprising that 2019 model year Mazda 6s weren't already on sale, but mid-year updates or late introductions aren't exactly out of the norm for Mazda. Since its introduction, the current generation Mazda6 has always remained a top choice among driving enthusiasts. That's because it's one of the few cars left in its class to still offer a manual transmission, next to the Honda Accord. But sadly, it seems even that's going to disappear for the 2019 model year update. CarsDirect originally heard through the grapevine that the Mazda6 sedan will be losing its standard six-speed manual while gaining some new safety tech. At first, we here at Autoblog were in denial. We had to reach out to Mazda to verify this unfortunate news. And sadly, it seems CarsDirect's findings are accurate, with Mazda USA's marketing and brand communications manager, Drew Cary, replying to our inquiry with the following statement: At Mazda we are always listening to our fans, especially when it comes to what they are looking for from our vehicles. As we have moved the Mazda6 upscale with the launch of the Grand Touring Reserve and Signature models, we have seen less demand for a manual transmission option.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Mazda zooms into SEMA 2016 with lighter MX-5 Speedster and RF Kuro concepts

It's almost time for the 2016 SEMA aftermarket show again, if you haven't guessed already by the steady parade of early looks at various show cars. Mazda's MX-5 creations are generally a highlight for us, unapologetic Miata junkies that we are. This year's cars should be just as exciting as last year's, one being a revision of last year's Speedster concept and the other based on the brand new, sexy RF retractable targa top model. Both SEMA MX-5s were designed and built in-house at Mazda's Irvine design studio. This year's Speedster is somehow even lighter than before. Mazda carved 100 pounds out of it, making it a staggering 350 pounds less than a production soft top model. It's also been repainted in a color called "White Ether", which we're imagining looks something like the "Blue Ether" paintjob on last year's highly reflective Speedster minus the blue tint. Mazda will probably never sell a roofless Miata or anything this lightweight, but maybe it should. It looks like it'd be a blast to drive at a road course. And then there's the RF Kuro concept, the first RF-based SEMA show car, which is shown in the teaser above. It doesn't seem terribly extreme, to be honest. It's wearing a matte charcoal paint, which explains the "Kuro" moniker – kuro means "charcoal" in Japanese. A set of 17-inch RAYS forged wheels and MX-5 Cup suspension, and that's about it. Not to knock it; the RF is a sexy looking thing as it sits, and Cup suspension should make it handle even more like a go-kart. Of course, both concepts will be fully revealed at the show next month in Las Vegas. Stay tuned for a dose of concept Miata hotness.Related Video: