2007 Mazda 6 Sport Touring Wagon 3l V6 on 2040-cars

Auto blog

Mazda's Skyactiv-X power and efficiency ratings released in Europe

Mazda's long-awaited Skyactiv-X engine is finally headed for production, though not yet for the United States. The Japanese automaker says "various European countries" will get access to the unique engine in the Mazda3 starting this fall. Still, the announcement is relevant to the rest of us because we now have official power levels and fuel efficiency numbers that we can use to compare the Skyactiv-X with other engines offered in the compact Mazda. First, the power. According to Mazda, the 2.0-liter Skyactiv-X makes 178 horsepower and 165 pound-feet of torque. By way of comparison, the 2.5-liter Skyactiv-G engine currently used in the Mazda3 here in the States makes 186 hp and 186 lb-ft of torque. Sure, it's a little less powerful, but note that the displacements don't match and remember that the real reason the Skyactiv-X exists is to reduce fuel consumption. And that brings us to the Skyactiv-X's combined rating of around 53.5 miles per gallon (converted from liters per 100 kilometers). That's around 8 mpg better than the 2.0-liter engine that comes standard in Europe. Before we go any further, it's important to note that these numbers represent official figures for the European NEDC combined cycle, which means they are not directly comparable to the ratings we'll get from the United States EPA. Our official ratings will almost certainly be lower. With that disclaimer out of the way, the 2.5-liter Mazda3 scores a combined 30 mpg here in the States. The obvious unanswered question is when the Skyactiv-X might actually come to America. And the unfortunate answer is that we don't know. Mazda has yet to make an official decision on timing for the U.S market's launch of the engine, but as soon as we know, so will you.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video:

2016 Mazda MX-5 Miata a knight in white satin

We're not going to lie to you. The reason you're seeing the fourth-generation Mazda MX-5 Miata on these pages again is solely because this is the first time we're seeing the roadster displayed in a color other than the ruby shade it was first shown in. Okay, okay, so this is the first time the Miata is being displayed at a North American auto show other than SEMA, and we'd say that this is the first time Mazda is showing a US-spec model, but clearly this is a right-hand-drive car. Either way, there's still not much to it yet, especially since Mazda is still withholding power and performance figures.
As expected, the ND Miata, as it is already known among the cognoscenti, will receive a 2.0-liter Skyactiv four-cylinder and the buyer's choice of a six-speed manual or a six-speed automatic here in the US. The 1.5-liter model engine that had been linked to the car back in the rumormill stage will not make it to our showrooms.
Preliminary specifications still show the Miata measuring just 154.1 inches in length overall, with an increased track width to 68.1 inches and a low, low overall height of 49.0 inches. Despite the larger-displacement engine and its presumably heavier weight, Mazda is still claiming ideal 50:50 weight distribution and a weight loss of over 220 pounds versus today's NC generation. All of which sounds like the Miata has the right ingredients to make good on its promised Jinba Ittai ("rider and horse as one") driving experience.