2006 Mazda Mazda6 S on 2040-cars

Auto blog

2020 Mazda CX-9 gets more torque and second-row captain's chairs

The 2020 Mazda CX-9 is here, and it’s even more enticing than the 2019 model year SUV. ItÂ’s not a full redesign, but Mazda shook up the features list to make it more competitive with other three-row crossovers. Most notable (arguably) of all changes comes from a small increase in torque — the 2.5-liter turbocharged four-cylinder gets bumped from 310 pound-feet of torque to 320 pound-feet. Horsepower remains the same at 250 horses. Those figures are only applicable when using 93 octane fuel. They go down to 227 horsepower and 310 pound-feet of torque when on 87. Another new feature is an off-road traction assist button, replacing the traction control button. This new feature is meant to help when navigating rougher terrain. HereÂ’s how Mazda describes its function: “When the diagonal wheels lose traction, off-road traction assist will stop reducing the engine torque and increases the brake force on the wheels without traction. This transfers power to the wheels still on the ground to help allow the vehicle to regain traction and continue the drive.” WeÂ’ll be interested to see how this helps the CX-9 on a snowy Michigan winter day soon. The number of standard features on the base Sport trim is up, too. Now all CX-9s get heated front seats, a power driverÂ’s seat, rain-sensing windshield wipers, heated outside mirrors and auto high-beams. Additionally, Mazda made its full suite of i-Activsense safety features standard. This includes adaptive cruise control, lane-keep assist and other driver assistance niceties. Mazda is also adopting the new key fob design of the Mazda3 for the CX-9. Optional on the Touring and Grand Touring are second-row captainÂ’s chairs. Previously, Mazda only offered bench style seating for the CX-9, so this addition could be a huge turn-on for some folks in this segment. The chairs have armrests, and the lack of a center pull-down means Mazda had to redesign its cupholder layout in back. In CX-9s equipped with the chairs, the cup holders and USB ports are now integrated into the backside of the front center console. If you opt for the captainÂ’s chairs in the Grand Touring or Signature trims, the seats are heated.  Pricing does increase a fair amount for the 2020 CX-9. A base front-wheel drive Sport is now priced at $34,835 including destination, a $1,510 increase from last yearÂ’s base price. The top of the range only got $750 more expensive, though, as the Signature starts at $47,160.

2016 Mazda CX-5 recalled to address failing DRLs

Mazda announced Tuesday that it will recall more than 35,000 examples of the 2016 CX-5 crossover to address an issue that may lead to deterioration or failure of its LED daytime running lights.  In affected models, the gasket used to seal the wiring harness to the LED module was not manufactured to Mazda's specification. As it degrades over time, it can release sulfur, which in turn can potentially corrode the LED control circuit, causing the LEDs themselves to flicker, illuminate poorly or even fail outright.  Per Mazda, there is no alert for this condition, so drivers can potentially lose daytime running light function without realizing it, leaving them tougher to spot in poor light.  The campaign will cover 36,761 CX-5s sold in the U.S. and U.S. territories. Mazda says no accidents or injuries related to the issue have so far been reported.  This new campaign has not yet been published in the National Highway Transportation Safety Administration (NHTSA) recall database, and Mazda's statement did not include details of the proper remedy for the issue or when customers can expect to be contacted to arrange for service.  We expect that all 2016 CX-5s with LED DRLs will receive new harness gaskets and that those showing signs of LED module corrosion will have those replaced as well.  The 2016 CX-5 has been the subject of four other recall campaigns — including one for an improperly torqued steering knuckle bolt and another for a defective fuel filler pipe — but this is the first  new campaign for that model year since 2016.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

Masamichi Kogai new Mazda president and CEO

There's some executive rearranging going on in the top suite at Mazda Motor Corporation in Japan, with current CEO Takashi Yamanouchi telling reporters there "I'd like to hand over the work to younger people" now that the company has returned to profitability. Yamanouchi became CEO on November 19, 2008 of an independent Mazda that had to fight for its future in the immediate aftermath of the global financial crisis. What followed was four years of losses before finally getting back to black last year.
Masamichi Kogai (pictured) will be appointed the new president and CEO on June 25, pending approval at the company's annual general shareholders' meeting. Kogai assisted Seita Kanai with the production-efficiency initiative that Mazda called Mono Tsukuri Innovation, which worked to give export-dependent Mazda the best chance at profitability in spite of a rising yen. Kogai, lately in charge of production and purchasing, has been with the company since 1977 and worked in areas from R&D to logistics.
Kanai, who headed the Mono Tsukuri effort and was among the leadership on Skyactiv, will be promoted from executive vice president to vice chairman. Akira Marumoto will become executive VP of Mazda and assistant to new president Kogai. Yamanouchi will remain Chairman of the Board. There's a short press release below to make it official.