2006 Mazda 6 S Sedan 4-door 3.0l Black On Black Leather Nice Sport Rare Manual on 2040-cars

Auto blog

What a 181-horsepower 2019 Mazda MX-5 Miata means for us, and you

Last month, we reported on a VIN filing dug up by Road & Track that showed that the 2019 Mazda MX-5 Miata's 2.0-liter Skyactiv-G engine would get a power bump, from 155 to 181 net horsepower. As for how the 2019 Miata would make that extra power, we heard rumors it'd utilize a new cylinder head allowing higher revs, accounting for that extra power. Now we have what appears to be a leaked document from Mazda Canada showing exactly where that extra power comes from. According to the document posted at Miata.net (registration required to see the image), Mazda will alter camshaft lift and valve size on both the intake and exhaust side, fit freer-flowing exhaust, and smooth and enlarge the piping on the air intake side. There are also internal engine modifications: lighter pistons with lower crowns for better swirl in the combustion chamber, lighter connecting rods, and a crankshaft balanced for higher-RPM operation. All those extra revs mean extra vibration and noise, so Mazda will ditch the single-mass flywheel for a "low-inertia" dual-mass flywheel – which will attempt to find a nice balance between DMF damping action and SMF directness. Overall, it's a pretty serious engine revision with some driveline changes that will heavily affect the driving characteristics of a fantastic driver's car. Contributing Editor James Riswick and Senior Editor Alex Kierstein, both well versed in Miatas past and present, are here to analyze what this could mean for the little roadster. James Riswick: I don't know much about them lighter crank combustion rods, but I for one welcome the news of more power to the Miata. The jump from 155 to 181 seems like a very prudent Mazda-like thing to do, accomplishing that task through various aforementioned technical wizardry as opposed to slapping on a turbocharger, exclaiming "yee-hah" and calling it a day. Alex Kierstein: That's true. I'm wary of additional power, but you do make a good point that at least this is the right way to do it. Going all-motor will keep the bright responsiveness of the engine intact. But higher revs might make power delivery peakier. Frankly, I'd be ok with moving the torque and horsepower peaks up a bit in the rev range, making it a bit more work to access the engine's sweet spot. The dual-mass flywheel should also help if low-end torque suffers, so less stalling in traffic. JR: Did wonders in the 911 and 718s.

Leaked images show digital gauge cluster for Mazda3

Most everything divulged about the 2019 Mazda3 so far has focused on the trick Spark Controlled Compression Ignition (SPCCI) Skyactiv-X engine. If a series of photos posted on a Chinese website are accurate, it looks like Mazda has novel plans for the cockpit as well. The three images show a three-color, all-digital gauge cluster in two different configurations. The first configuration places a three-digit speedo in the center of a blue-ringed tachometer, with gear indicator and water temp displays on the left, fuel range calculator and what appears to be a funky clock on the right. The second configuration splits the tachometer to the left and the speedo to the right. In between them is what looks like a road surface display for automatic cruise control. Trip info lies just under the blue-banded road, while water temp, fuel gauge, gear indicator and range info line up across the bottom. A swath of empty space on the left could be where Mazda's relocated the current car's passel of warning signals. Of note: Everything around the digital gauges appears to come straight from the current Mazda3. The instrument panel surround, the steering wheel and buttons, the stalks, all of it is lifted from today's car. If the photos are what's headed our way on some trim of the 2019 Mazda3, though, they show a clean, handsome evolution of the no-nonsense cluster in the current compact hatch. Mazda's worked up a head of good press on the run-up to the Mazda3 launch for both the engine and the dynamics. We're told we'll get between 10 and 30 percent more torque from the 2.0-liter SPCCI Skyactiv-X, and about 25 percent better fuel economy compared to today's 2.0-liter Skyactiv-G. Handling-wise, the jinba ittai philosophy — horse and rider as one — has led to engineers reworking everything from tire sidewall stiffness to multi-contoured torsion elements and the mounting and shape of the seats. The hatchback's torsional stiffness climbs by 30 percent, any excess rigidity countered by 7.5 meters of "matrix resin material" applied in 16 places on the body "to absorb vibration and dissipate it as heat." The point has been to eliminate dynamic static between the driver and the road, and then to give the driver the best natural seating position to take advantage of the body's reflexes to dynamic input. At the same time, this digital gauge cluster might also give that driver something tasty to look at. Related Video:

Mazda on sales upswing in Europe but won't build there

Auto sales in Europe have been a tricky proposition for some years, but Mazda has seen some success on the backs of the CX-5 and new Mazda6. According to a report form Automotive News Europe, though, that doesn't mean we should be looking for the Japanese manufacturer to set up production operations there.
Mazda's European CEO, Jeff Guyton, explained to AN that "Our intention is to have manufacturing scale. That gives you scale economy and quality through repeatability." In other words, a big honking plant in one part of the world is preferable to a half dozen small factories building the same vehicles.
European sales for Mazda are up 5.4 percent in the first half of 2013, with 74,000 units sold. That kicked the Zoom-Zoom brand's market share up from one to 1.2 percent. Small gains, but gains nonetheless. According to Guyton, Mazda would need to sell 200,000 units of just one model in Europe for local production to make sense. Mazda's best European year saw 320,000 units sold across the entire range.