Used Mazda5 Sliver on 2040-cars

Auto blog

Crossovers help Mazda post its best January sales in 24 years

Mazda's 2017 ended on a bit of a flat note. It wrapped up the year with 2.8 percent fewer U.S. sales than 2016, and 8 of the 12 months lower month-over-month. But 2018 is off to a much brighter start with the company having its best January sales month since 1994, with just under 25,000 cars sold. Besides that headline statistic, the higher sales also mean this January exceeded 2017's sales by 15 percent or about 3,300 cars and put it ahead of January in that healthy 2016 year. Compared with this past December, though, sales are down about 2,000 cars. The gains are entirely due to the success of Mazda's crossover SUVs. The CX-5 was the best of the best with a month-over-month gain of over 66 percent. In actual numbers it sold about 13,500 copies compared with about 8,000 last January. The big three-row CX-9 had a big jump going from 1,600 units sold last January to about 2,300 for a gain of almost 47 percent. Even the little CX-3 saw a small gain between the two Januarys, going from about 1,200 to 1,350 sales. View 14 Photos Mazda's January would've been even better if its conventional cars hadn't dropped so much. Both Mazda Miata and Mazda6 sales dropped by just over half. The Mazda dropped from 3,300 sales to just under 1,600, and the Miata dropped from a little over 900 to a little over 400. Mazda3 held on a little better with just a 12 percent drop from last January going from about 6,600 to 5,800 sales. The lopsidedness of these sales isn't all that surprising. Crossovers have been a boon to loads of manufacturers. For example, Mitsubishi had an 2017 full of sales improvements, with the company finally breaking 100,000 units for the first time in years, and it was all because of improving crossover sales. January's sales also continue an unfortunate downward trend for Mazda's cars, with both the Mazda6 and Mazda3 having month-over-month declines every single month since February. It will be interesting to see if the new turbocharged engine option on the Mazda6 will improve sales of the sedan later this year. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mazda patents show rotary engine for range-extended EV

Two years ago, Mazda introduced a fascinating range-extended electric car called the Mazda2 RE Range-Extender. It took an electric Mazda2, and dropped in an itty-bitty 330cc rotary engine. It wasn't the rotary-powered sports car we had hoped for, but it seemed like a unique way to keep the quirky engine alive and kicking. But not long after the car's reveal, it seemed to disappear. Now the basic idea has resurfaced with a few modern updates in a couple of US patents. The first patent is pretty straightforward and describes a range-extended EV similar to the BMW i3. At the front is an electric motor driving the front wheels. At the back is an internal combustion engine that powers an electric generator. In the middle is a lithium-ion battery for storing and delivering electricity. It's the same set-up as that Mazda2. The second patent is for an engine start-and-stop system, but specifically for rotary engines. The system is designed to shut off a rotary engine when not needed, much as modern piston engines do. It also stops the rotor in a position that closes the intake port to ensure no fuel or exhaust emissions slip out through the intake tract. This is necessary since there are no valves in a rotary, and air and exhaust come through ports that are "opened" and "closed" by the rotor itself. The patent also describes the possibility of firing a spark plug after the fuel has been cut to eliminate any leftover fuel emissions. This system would theoretically improve a rotary engine's fuel economy and emissions significantly, which would be a boon as those are two of the rotary's major weaknesses. The rotary-engine patent also includes the same range-extended powertrain drawing as the first patent. It's there as a description of a possible application. And in such an application, where the rotary wouldn't have to run all the time, the system could take advantage of the rotary's inherent strengths. Weight can be kept low thanks to the engine's small dimensions, which should help in keeping the car sprightly and efficient. Rotaries are renowned for smoothness, too, so it shouldn't need too much refining and sound deadening, the latter of which adds more weight. The small size would also help with packaging, leaving more space for people, cargo, or possibly batteries. And since it has been patented, the company may be looking to bring the system to market.

Mazda hits Vegas with a pair of Sixes

Despite the fact that the annual SEMA show is more of an exercise in what "could be" than what "will be," it gives automakers the chance to stretch the legs of some of its most important models. Take the 2014 Mazda6, for example - it's hardly new, having gone on sale early this year - but this year's SEMA expo marks the first time Mazda has been able to show off the customization possibilities for its sleek midsize sedan. To that end, the Japanese automaker has arrived in Las Vegas with two very different takes on its sexy Six.
First up is the Mazda6 Club Sport you see above, wearing a "motorsports-inspired" gray, black and red accent-color scheme that, as Mazda says, is "represented in not-so-subtle angular lines reminiscent of a car speeding past your line of sight." The whole car is done up in a base color of Composite Grey, and uses a Brilliant Black roof to match the similarly colored front, side and rear diffusers, as well as the rear spoiler. Mazda has fitted the Club Sport with Rays 57 Motorsport G07FXX 20-inch wheels, wrapped in Yokohama 245/35R20 tires. Powering the CS is Mazda's 2.2-liter Skyactiv-D diesel four-cylinder engine (that we'll get in the standard Six early next year), and other changes include an H&R spring kit, larger Brembo brakes and a Racing Beat exhaust.
And then there's the Ceramic 6 Concept, pictured right. The name comes from the car's Ceramic White paint, though we don't really get the Taupe Silver accent stripes. Mazda says they're meant to mimic "the linear frequency patterns found on the likes of couture dresses and flowing fabrics," but it just looks a bit overwrought to us. The Mazda6 already has so many clean lines, why add more?