2012 Mazda 5 Touring 28k Warranty Cd Automatic Great Shape on 2040-cars

Auto blog

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

Mazda3 successor due in dealers this fall

Following exciting new models like the 2013 CX-5 and 2014 Mazda6, Mazda is getting ready to introduce the next generation of its high-volume compact, the Mazda3. After talking to several of Mazda's dealers, Automotive News is reporting that the automaker is planning to introduce its new compact this fall, which is earlier than what was originally reported.
Aside from what we've seen in recent spy shots and what appeared to be a full-scale design mockup back in October, there is little information about the third-generation 3, but we can see that the car will get plenty of cues from Mazda's stylish Kodo design language, and we expect even more technologies from the company's SkyActiv efficiency program to come to bear. AN says that Mazda is hoping to top 300,000 sales this year in the US, and the sooner Mazda can replace the current aging 3, the better chances it has at reaching that goal.