Mazda3 2007 36,092 Miles Automatic A/c Cruise Control Grey 4d Amazing! Rare on 2040-cars

Auto blog

Mazda keeping non-hybrid, non-electric Skyactiv strategy

Mazda still thinks that it can buck the trend of adding those fancy batteries and electric motors to its cars. At least for a little while longer. Hopefully. Speaking to Auto Express recently, Mazda's European boss, Jeff Guyton, said that he expects his company's cars to be able to get a lot more efficient without resorting to any of that fancy electrification stuff. "I think there's at least 20-30 percent better fuel economy by the end of the decade," he said. He said that he expected to get to Europe's low target of 95 grams of CO2 per kilometer, "without any significant deployment of electrical drive." This part is all in line with Mazda's long-term Skyactiv strategy, as laid out back in 2011 and first mentioned publicly in 2010. Remember, this is the company that once proudly proclaimed, "Not Electric. Not Hybrid. Not A Drag To Drive." As explained back in 2011, Mazda hopes to wait until other automakers have done all of the heavy lifting on developing plug-in and hybrid tech so that when Mazda enters the market, things will be cheaper. Of course, Mazda has been quietly testing all-electric vehicles and Guyton said that there may be an Mazda EV at some point. "We are interested in electric technology and it will be in the distant future when it will be quite important," he told AE. "But we think it will take some time to be commercially attractive without tax payer-funded incentives." How much of a delay? Well, there is a gas-electric Mazda 3 hybrid available in Japan that uses some powertrain parts from the Toyota Prius, and we all know that the Prius has been around for ages. Maybe in 2025, Mazda will come out with a Leaf-based Mazda 2. Related Video: Green Mazda Fuel Efficiency Electric Hybrid skyactiv mazda skyactiv

2016 Mazda MX-5 Miata first engine shot revealed

We've dug deep for just about every scrap of 2016 Mazda MX-5 Miata info available out of the car's California reveal celebration, but powertrain particulars have been especially hard to come by. While we still don't have engine specifications, the folks over at Autoweek have scored a nice scoop - the first underhood photos of one of the display cars.
In the image above, the ND-generation Miata is clearly shown to be powered by a Skyactiv inline four-cylinder, as expected, but its displacement remains unclear. The engine is most likely either the 2.0-liter Skyactiv-G engine offered in low-end Mazda3 and CX-5 models or the 2.5-liter Skyactiv-G found in those same vehicles' upper trims. In those iterations, the 2.0-liter generates 155 horsepower and 154 pound-feet of torque, while the larger-displacement engine nets out at 184 hp and 185 lb-ft. There is no sign of a turbocharger, a feature rumored to be fitted to at least one test mule. There has also been previous rumors of a 1.5-liter Skyactiv engine, possibly for overseas markets.
The 2.0-liter strikes us as the most likely scenario, particularly as Mazda has worked diligently to save every gram in the new car, dropping a pledged 100 kilograms (220 pounds) over the current model, even while adding content. It's entirely possible that the alleged turbo car was, in fact, a mule for the Miata's Alfa Romeo sister car, which is expected to have a wholly different powertrain. Or it could simply be a second engine option for an eventual Mazdaspeed variant, perhaps.

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.