I Touring Manual 2.0l Cd Front Wheel Drive Power Steering 4-wheel Disc Brakes on 2040-cars

Auto blog

2019 Mazda3 gets only two engines in U.S.; here are details on suspension, AWD

We learned a lot about the 2019 Mazda3 hatchback and sedan when it made its debut at the L.A. Auto Show. It will still have a manual transmission, it will offer all-wheel drive for the first time, and it's a stunner inside and out. But we still had questions about some of the details, so we spoke with folks from Mazda, including a couple of engineers for details on engines, suspension and drivetrains. First off, of the five engines announced for the Mazda3, just two of them are slated for the United States. At launch, the Mazda3 will be offered only with a naturally aspirated 2.5-liter four-cylinder. It's mechanically pretty much the same as what you'll find in the Mazda CX-5 and Mazda6. It even features cylinder deactivation. The only real difference between this engine, its predecessor, and the one in other Mazdas is some minor engine tuning tweaks. Power is almost the same with 186 horsepower and 186 pound-feet of torque, gains of 2 horsepower and 1 pound-foot. Fuel economy is rated at 27 mpg in the city, 36 on the highway, and 30 overall for front-wheel-drive models. We would expect the all-wheel-drive model to have slightly worse fuel economy simply due to extra weight and having to power two extra wheels. The Skyactiv-X engine will become available later in 2019. It will be rolled out in Europe first, with America coming after. When it does come here, it will be offered in states with stricter emissions regulations before coming to other states. While we're on the topic of engines, we also probed a bit about the possibility of the turbocharged 2.5-liter engine coming to the Mazda3. We did get the typical response of not being able to comment on future product. However, they did confirm that the turbocharged engine does in fact fit in the new Mazda3, since it and the naturally aspirated engine are very similar, and the naturally aspirated engine still uses an enormous header, meaning turbo plumbing wouldn't be an issue. Everyone we spoke with at Mazda did emphasize that they are listening closely to buyers, which is what led to the turbo engine being offered on the Mazda6 and CX-5, as well as the introduction of all-wheel-drive to the Mazda3. So, if you, like us, want to see the turbo engine added to the Mazda3, let the company know. They might just do it. Now as for drivetrains, the company is still deciding which trims and which combinations of engines will be offered.

Fiat 124 caught entirely undisguised

Dear automakers, please continue making these kind of mistakes. Thanks to what we're guessing is some lax security, the all-new, Mazda MX-5 Miata-based Fiat 124 was spotted taking part in a photo shoot near Santa Barbara, CA. The images show what we'd consider a fairly simple rebadging job. The 124 gets new front and rear clips that not only harken back to the original 124 (not to mention other Fiat roadsters, like the Barchetta), but also serves to distance this droptop from the rest of the company's US range. The similarities between the 124 and the car it's based on are even more obvious in the cabin. This is an MX-5 interior with Fiat's big, red badge on the tiller. That means the same quality materials and knob-dial infotainment system that have been so well received in the Miata. It's under the hood, though, where the Fiat really differs from its Japanese cousin. According to our spy, the vehicle shown here features some kind of two-pedal setup – probably the six-speed Euro twin-clutch used in the 500L and Dodge Dart. Don't worry, though, a six-speed stick will also be on offer. Regardless of transmission, we can expect a 180-horsepower version of the 1.4-liter, turbocharged, four-cylinder offered in the 500 Abarth. And if that's not enough good news, a dedicated Abarth model will likely arrive after launch, which our spies claim will use the 1.75-liter turbo and DCT from the Alfa Romeo 4C. While this represents a good look at the new 124, we'll probably be waiting until the LA Auto Show in November for the official look. Stay tuned.

Mazda's Apple CarPlay and Android Auto retrofit costs $199 plus labor

In relation to the rest of the market, Mazda was a bit behind with introducing Apple CarPlay and Android Auto to its model range, but it's trying to make up ground. But now, vehicles equipped with Mazda Connect from the 2014 model year and newer are eligible for a dealer-installed upgrade with smartphone integration capabilities. But it's not a free update. Mazda first introduced Carplay and Android Auto capabilities on the 2018 Mazda 6 and further extended the technology to the 2019 CX-9 and CX-5 utility vehicles. Now the company wants to make the smartphone interfaces available across the lineup. For $199, plus labor costs, owners can buy the upgrade. In addition to the updated Mazda Connect software, Mazda will also update hardware, including more powerful and faster-charging 2.1-amp USB ports. It is important to remember that Mazda's infotainment touchscreens do not function while driving, so even with Android Auto or Apple CarPlay, functionality will run through the command knob, buttons, or voice commands. For those interested in the upgrade, it is recommended to schedule an appointment for the upfitting. The service will take approximately two hours.UPDATE: A previous version of this story mistakenly said that Mazda's infotainment systems are not touchscreens. This is incorrect. The story has been updated accordingly.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2018 Mazda6 Turbo first drive