I Touring Auto 6cd Sunroof Ac Abs Power Optns Only 41k Miles Must See!!!!!! on 2040-cars

Auto blog

Junkyard Gem: 1981 Mazda RX-7

The first-generation Mazda RX-7 was sold for the 1978 through 1985 model years, and for decades you'd see and hear these nimble little sports cars buzzing around American streets. Then, well, the apex seals went out, or owners tired of a 2,400-pound car that drank fuel like an Eldorado, or the floor pans were eaten by the Rust Monster... and then nearly all of them were gone. Enough of them remain, however, for a steady trickle to show up with depressing regularity in self-service wrecking yards. Here's a pretty solid '81 that I found in a Denver yard last month. The 12A Wankel engine in this car made 100 hp and 105 lb-ft of torque, which was very good for 1981 (considering that you could buy a new Camaro with a 115-horsepower V8 that year). The $9,385 RX-7 looked like an especially good value when compared to, say, the $11,299 Datsun 280ZX or the $8,997 Fiat 124 Sport Spider, being much lighter on its feet than the former and much quicker than the latter. View 12 Photos If you have ever considered getting one of these cars, move fast before all the restorable ones are gone! Auto News Mazda Automotive History mazda rx-7

1993 Mazda RX-7 Retro Review | A '90s hero turns 25

Boom times build interesting cars. In the late 1980s, Japan was flush with capital, and automakers spent like the party was never going to end. Suddenly building the third-generation RX-7 — the world's most advanced twin-turbo rotary sports car — seemed like the most natural thing a small car company hailing from Hiroshima could do. On this side of the Pacific, however, there was no context for the sudden influx of unusually tricked-out Japanese hardware flooding American dealerships. And none of the Japanese sports cars of the era was more unusual than the FD-generation Mazda RX-7, imported from 1993 to 1995 (and continuing on in Japan until 2002). Although the island nation's economy was headed on a downward spiral by the end of 1990, Mazda was in no position to pull back and walk away from the development dollars that had already been spent on its latest RX-7. As a result, Americans were able to briefly bask in the glow of one of the most unique engineering experiments ever unleashed on unsuspecting buyers. For its time, the Mazda RX-7 was a spaceship. With fluid lines that screamed "exotic," it joined the NSX in showing that supercars didn't have to have European blue blood running in their cooling systems to elegantly snag eyeballs. The twin-rotor, 1.3-liter 13B-REW situated behind the RX-7's front axle revved all the way to 8,000 rpm on its quest to produce 255 horsepower and 217 pound-feet of torque, with a pair of sequential turbos handing boost duties back and forth around the 4,500 rpm mark. A five-speed manual gearbox was standard with the FD (a four-speed automatic was optional), as was a curb weight in the neighborhood of 2,800 pounds — nearly 500 lbs less than the contemporary Toyota Supra. Significant figures for the era, to be sure. While they might pale in comparison to the average sports car today, slide into the RX-7's cockpit and drive the car, rather than just crunch the numbers. You'll quickly discover what can be accomplished when the company that engineered the Miata pulls a full John Hammond and "spares no expense" developing a world-beating sports car platform. The 1993 Mazda RX-7 I've been loaned from Mazda's classic collection is an R1 car, which means tighter suspension tuning, a few cosmetic upgrades, and a Competition Yellow paint job.

Next-gen Mazda MX-5 could use carbon fiber to cut weight

The current Mazda MX-5 Miata has only been out for a few years, but the automaker is allegedly looking for ways to lighten the next one. According to a report from Autocar, Mazda is looking to carbon fiber to help the next-generation MX-5 cut weight and use a smaller engine. Despite having more safety features, modern amenities, and a stiffer body, the current MX-5 is the same size as the original sports car from 1990 and weighs less than its immediate predecessor. In a recent interview with Autocar, Nobuhiro Yamamoto, head of the Miata program, revealed that the next generation of the Miata will probably stay the same size, but could be even lighter thanks to the utilization of carbon fiber. The current MX-5 uses high-strength steel and aluminum, and Mazda doesn't use carbon fiber in any of its cars. Carbon fiber is expensive to incorporate into road-going vehicles, and so Yamamoto notes that Mazda has been hard at work making it more affordable. A lighter car could result in a smaller engine, Yamamoto said. In the US, the MX-5 comes with a 2.0-liter four-cylinder engine that makes 155 horsepower, while the Japanese and European version comes with a 1.5-liter, 130-hp engine. A smaller engine would make the sports car even lighter. It's unknown at this time if the automaker is collaborating with another automaker or a supplier to make produce carbon fiber, or if it'll make it in-house. There's no word on how much carbon fiber the next MX-5 will wear or how it will affect the sports car's price. Autocar reports that the next MX-5 won't arrive anytime before 2021, which could make the ND MX-5's lifespan an unusually short five years long. With cars getting heavier, it's nice to hear that Mazda is working on finding a way to make its lightweight sports car even lighter. Related Video: News Source: AutocarImage Credit: Mazda Mazda Convertible Coupe Lightweight Vehicles