I Touring 2.0l Leather Mazda Certified Warranty 1 Owner Clean Carfax Smoke Free! on 2040-cars

Auto blog

Mazda CEO says rotary not viable, so don't look for a new one

We have some very sad news to report, rotor-heads fans: Don't expect a new rotary-powered vehicle anytime soon. This comes straight from Masamichi Kogai, the CEO of Mazda, which is the only company to ever market a commercially successful rotary-powered automobile in the world. The issue, as it has pretty much always been, is environmental.
While the Wankel rotary engine does indeed make a lot of power in a small, lightweight package, it does so while burning lots of fuel and emitting lots of noxious gases into the atmosphere, at least when running on gasoline. And that means the rotary engine will likely only ever be able to power niche vehicles. And that, in turn, means that it is very difficult to turn a profit on vehicles with rotary engines, particularly for a small automaker like Mazda.
"It has to be a viable commercial proposition. If we are going to adopt it, it has to be a product that can generate at least sales of 100,000 units a year. We have to be able to achieve a profit," said Kogai in an interview with Automotive News. Mazda sold 56,203 RX-7 models in the United States (the automaker's biggest market) in 1986. Sales of the RX-8 peaked in 2004, its first full year on the market, with just 23,690 units.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Fiat version of Mazda MX-5 Miata to be called 124 Spider

Fiat has a definite use for its recent US trademark on the 124 Spider name, and it's something that should make many performance fans quite happy. FCA CEO Sergio Marchionne confirmed to Auto Express that the Italian brand's future roadster would bear the classic name. Auto Express reportedly asked Marchionne directly about the convertible at the 2015 Geneva Motor Show. The CEO said: "Do we want to do it now?" After another executive verified the name, Marchionne responded: "There you go – a world class premiere right in this room!" Autoblog reached out to Fiat Brand communications boss in the US Ariel Gavilan for more information, and he verified the story. Gavilan said that brand head Olivier Francois confirmed the 124 Spider name to international media during a briefing in Geneva. FCA isn't going quite so far as officially confirming that the 124 Spider shares a platform with the latest Mazda MX-5 Miata, but that's almost a certainty. The two automakers jointly developed the chassis, and the original plan was for it to underpin an Alfa Romeo. However, Marchionne didn't want an Alfa assembled outside of Italy. Fiat even hinted at this possible change as far back as the corporation's five-year plan last summer. Insiders tell Auto Express that the 124 Spider reportedly carries retro-inspired style, and hopefully, that means the roadster evokes the look of the original 124 Sport Spider (pictured above) by Pininfarina. Fiat allegedly is also aiming for a weight less than 2,205 pounds, and the engine range is likely comprised of versions of the brand's 1.4-liter turbo. The mill already pumps out 160 horsepower and 183 pound-feet of torque in the Fiat 500 Abarth in the US. According to Auto Express, Fiat and Mazda have an agreement to launch the Miata in 2015 and the 124 Spider in 2016. A hotter Abarth version could come along eventually, too. Related Video: