4dr Sdn Auto S Sport Low Miles Sedan 5-speed Gasoline 2.3l Dohc Mpfi 16-valve I on 2040-cars

Auto blog

What a 181-horsepower 2019 Mazda MX-5 Miata means for us, and you

Last month, we reported on a VIN filing dug up by Road & Track that showed that the 2019 Mazda MX-5 Miata's 2.0-liter Skyactiv-G engine would get a power bump, from 155 to 181 net horsepower. As for how the 2019 Miata would make that extra power, we heard rumors it'd utilize a new cylinder head allowing higher revs, accounting for that extra power. Now we have what appears to be a leaked document from Mazda Canada showing exactly where that extra power comes from. According to the document posted at Miata.net (registration required to see the image), Mazda will alter camshaft lift and valve size on both the intake and exhaust side, fit freer-flowing exhaust, and smooth and enlarge the piping on the air intake side. There are also internal engine modifications: lighter pistons with lower crowns for better swirl in the combustion chamber, lighter connecting rods, and a crankshaft balanced for higher-RPM operation. All those extra revs mean extra vibration and noise, so Mazda will ditch the single-mass flywheel for a "low-inertia" dual-mass flywheel – which will attempt to find a nice balance between DMF damping action and SMF directness. Overall, it's a pretty serious engine revision with some driveline changes that will heavily affect the driving characteristics of a fantastic driver's car. Contributing Editor James Riswick and Senior Editor Alex Kierstein, both well versed in Miatas past and present, are here to analyze what this could mean for the little roadster. James Riswick: I don't know much about them lighter crank combustion rods, but I for one welcome the news of more power to the Miata. The jump from 155 to 181 seems like a very prudent Mazda-like thing to do, accomplishing that task through various aforementioned technical wizardry as opposed to slapping on a turbocharger, exclaiming "yee-hah" and calling it a day. Alex Kierstein: That's true. I'm wary of additional power, but you do make a good point that at least this is the right way to do it. Going all-motor will keep the bright responsiveness of the engine intact. But higher revs might make power delivery peakier. Frankly, I'd be ok with moving the torque and horsepower peaks up a bit in the rev range, making it a bit more work to access the engine's sweet spot. The dual-mass flywheel should also help if low-end torque suffers, so less stalling in traffic. JR: Did wonders in the 911 and 718s.

Mazda CEO closes door on talk of RX sports car revival

Some rumors in the auto industry simply refuse to die. Over the last decade, a few of the strongest have focused on Japan. A few years ago, we could have explained away the constant whispering over a new Toyota Supra, Acura NSX or Mazda RX-7 as nostalgia for Japan's golden era of performance. Today, though is different.
We already have the Nissan GT-R, and, thanks to the Toyota FT-1 Concept, a Supra successor finally appears to be on the way. Acura will someday, allegedly, deliver on its promise to put the NSX on sale. So where does that leave the third member of the Japanese performance trio mentioned above? Well, um, it still isn't happening.
"We don't have that kind of vehicle in our future product plan," Mazda CEO Masamichi Kogai told Automotive News when asked about a successor to the rotary-powered RX line. "If you increase the number of segments, then the resources we can allocate to each will decline and that will prevent us from developing truly good products."

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.