2014 Mazda Mazda3 I Touring Damaged Salvage Fixer Runs!! Good Cooling! Wont Last on 2040-cars

Auto blog

Mazda to use rotary engine as a range-extender with its first electric vehicle

There's more news from Mazda at the Tokyo Motor Show, where the brand made a big splash, including new developments in its never-ending rotary engine saga. First, Mazda execs confirmed that the Japanese automaker will bring back the rotary engine as a range-extender and battery juicer for its first electric vehicle in 2019. But secondly, the company won't have a rotary-powered successor to its RX-7 and RX-8 sportscars in time for the company's centennial anniversary in 2020. Autoblog previously confirmed that Mazda is planning to have an EV in 2019 that will be available in both pure electric and range-extending versions. Now, the Australian website Motoring reports that the global EV will feature a powertrain similar to the experimental Japan-only Mazda2 (Demio) EV, which used a single-rotor engine as a generator to power the battery pack and increase its driving range. The publication says Mazda plans to release a series of plug-in hybrids based on existing models around 2020, then a pure electric car co-developed with Toyota and Denso in 2021 as part of the EV Common Architecture Spirit Company joint venture. A Mazda spokesman tells Autoblog the company couldn't confirm any details about future products. Meanwhile, enthusiasts shouldn't wait for a rotary-based production version of Mazda's RX-Vision concept from 2015. Motoring cites two executives who explain that the company simply lacks the capital necessary to invest in developing the new model in time for its 2020 centennial. Mazda debuted its rotary engine 50 years ago in the Cosmo Sport in part as a way to stand out from its larger Japanese competitors. The engine, which uses a spinning three-tipped rotor in place of pistons, is smaller and lighter than conventional piston engines, with a greater power-to-weight ratio and quieter, smoother operation. But it delivers less fuel economy and higher emissions — two weaknesses that could be improved via a stop-start system Mazda has developed, based on a pair of U.S. patents. The company has also been hard at work developing its next-generation Skyactiv-X engine, which uses highly precise combustion ignition technology to deliver significant gains in fuel economy and power.Related Video:

Mazda doubles down with a pair of Threes

Looking to appeal to the compact tuner crowd, Mazda brought two different flavors of its 2014 Mazda3 to the SEMA Show in Las Vegas this week. The Club Sport 3 Concept hatchback (above) has more of a racing vibe to it, while the Vector 3 Concept sedan (right) looks to inject a little extra fashion into the all-new Mazda3.
Hotting up the 3, Mazda stuck with the stock 2.5-liter engine on the Club Sport 3 Concept but added a limited-slip differential and six-speed manual gearbox, the latter of which was lifted from the CX-5 crossover. Other upgrades include coil-over shocks, a performance exhaust, Brembo brakes and an aero body kit - the latter of which will be offered to buyers at a later date.
While the Vector 3 Concept does get some performance bits like two-piece Brembo brake rotors and grippier tires, the focus on this sedan is all about styling. Starting with a custom paint job and ghost stripes, the whole look is tied together with 19-inch, V-spoke Rays wheels.

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.