2013 Mazda Mazda3 I Touring on 2040-cars

Auto blog

New Mazda3 looks just like Mazda Kai concept in spy photos

Just a couple of weeks before the official reveal, one of our spy photographers caught the next-generation Mazda3 out testing in minimal camouflage. The car was a hatchback model, testing alongside a VW Golf and Audi A3, and was only wrapped in thin vinyl. As a result, we can clearly see that the new compact Mazda hatchback looks just like the stunning Kai concept from last year's Tokyo Motor Show. The car features effectively the same nose and profile of the concept. The main grille is larger than the current model, and it leans forward aggressively. The windshield is very low and sleek. The rear portion of the car is dominated by the very thick C-pillar that leans far forward, augmenting the car's athletic stance. The window sill at the rear kicks up sharply, and the rear window doesn't wrap around or bulge out, giving the car a very tight, taut shape. It's not just the outside of the 3 we get to see. We get a good look at the interior. It also looks very much like the Kai's interior, with the focus being the driver. The gauges are flanked by air vents that blend into the shape of the instrument binnacle. The rest of the dashboard is left as uncluttered as possible. The climate controls and vents all reside in the same long horizontal plane. The infotainment screen, which appears to be touch-sensitive based on one spy photo, is canted toward the driver. Mazda's rotary controller does return, as seen in the center console. Also in the center console is the manual shift knob, which we expect, or at least hope, will continue to be available in the U.S. We'll have answers to all our questions about the Mazda3 at the end of this month when it makes its debut at the L.A. Auto Show. We'll also see the sedan version of the car. The powertrain is the biggest mystery at the moment. Mazda showed the Kai with the Skyactiv-X engine, Mazda's spark-controlled compression-ignition gasoline engine. We've driven a development car with the engine, and Mazda seemed to intend the new Mazda3 to use it, but we're not sure if the engine will be ready for the car's launch. If not the Skyactiv-X engine, or perhaps in addition to, Mazda will probably use versions of its current engines. It could carry-over the naturally aspirated 2.0-liter and 2.5-liter four-cylinders currently used. The latter may use the cylinder deactivation now used on the Mazda6 and CX-5. We would love to see the company finally offer the turbocharged 2.5-liter engine from the Mazda6, CX-9, and now CX-5.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Mazda starts production of new MX-5 Miata in Japan

We often regard a new model as having arrived when its manufacturer reveals it for the first time. But you might argue that nothing is official until actual production gets underway. And that's just what's happened now with the new Mazda MX-5. The fourth-generation Miata was unveiled a few months ago, and now the first examples have begun to roll off the assembly line at Mazda's Ujina plant in Hiroshima. The first ones are set to stay in Japan, where the new roadster is being introduced initially. Deliveries are set to launch in June. After that, we can expect the new MX-5 to proliferate to markets around the world, including our own. To date Mazda has sold more than 950,000 of its little roadsters, making it the best-selling two-seat sports car in the world. It shouldn't be long, then, before the new model tips it past the million-unit mark. 2015/03/05 Mazda Starts Production of All-new Mazda MX-5 HIROSHIMA, Japan-Mazda Motor Corporation today began production of the all-new Mazda MX-5 two-seater lightweight sports car (known as Mazda Roadster in Japan) at Ujina Plant No.1 in Hiroshima. The first models produced are destined for the Japanese market. Sales of the all-new MX-5 will begin in Japan around June this year and interested buyers can make an appointment for pre-sale discussions through a dedicated website from noon on Friday, March 20. Following sales start in Japan, the MX-5 will be progressively rolled out to overseas markets. The MX-5 is an iconic model representing Mazda's vehicle engineering philosophy: the pursuit of driving pleasure. With production exceeding 950,000 units as of the end of January 2015, the MX-5 continues to hold the Guinness World Record for the world's best-selling two-seater sports car. In order to respond to ever increasing demands for safety features and environmental performance while maintaining the element of fun that has always defined the model, development of the fourth generation MX-5 was carried out under the motto "innovate in order to preserve". In addition to incorporating SKYACTIV TECHNOLOGY and KODO-Soul of Motion design, development focused on enhancing the senses and sensations through which people enjoy cars. Moving forward, Mazda will continue to enrich the lives of its customers through a variety of touch points including the production of high-quality vehicles, and become a brand that maintains a special bond with its customers. Related Video: