2010 Mazda Mazda3 I Touring on 2040-cars

Auto blog

2016 Mazda CX-9 First Drive

Automotive enthusiasts tend to obsess over spec sheets. How else could we know which cars and trucks are the quickest in a straight line, hold the road with the greatest tenacity, or tow the biggest trailers? More succinctly, what ammunition would we have in the seemingly endless back-and-forth of Internet forums if it weren't for specifications? Mazda's engineers think they've found a better way. The 2016 CX-9 has less horsepower than its primary competitors. The only engine available is a turbocharged four-cylinder, hooked to a six-speed automatic. Drivers won't miss the 23 horsepower (or more, as we'll soon explain) lost in the changeover from 2015 to 2016, because Mazda applied its holistic Skyactiv approach to the largest vehicle it offers. That means less weight and, ultimately, more fun. Or so they say. Are they right? Yes. And no. Most of the time, in normal on-road driving conditions, the 2016 CX-9 is the most fun you can have with three rows. But the real-world tradeoff didn't go off completely without a hitch. Reasoning that real-world performance is more important than ultimate horsepower, Mazda specified a four-cylinder for its big, three-row SUV instead of a more traditional V6. Let's get those all-important specifications out of the way: All 2016 Mazda CX-9s are fitted with a 2.5-liter turbocharged four-cylinder with 250 horsepower and, impressively, 310 pound-feet of torque at just 2,000 rpm. Unless you decide to use 87 octane, in which case you'll be limited to 227 horsepower. Mazda doesn't think owners will actually notice the difference in power levels, so there's no Premium Fuel Recommended sticker on the back of the fuel door. Mazda utilized some clever turbo trickery to deliver a diesel-like torque curve from its gasoline-fueled engine, which makes the small-displacement powerplant feel lively at low engine speeds. The flipside is that the CX-9 runs out of breath as the needle swings across the upper reaches of the tach. While that simply wouldn't do for a sportscar like the MX-5, in the CX-9 it's not necessarily a deal breaker. One benefit to the downsized engine is that it doesn't guzzle fuel. The EPA rates the CX-9 at 22 miles per gallon in the city and 28 on the highway. Drop one mpg all around for the all-wheel-drive model. Those figures beat out all the CX-9's most natural competitors, including the Honda Pilot and Toyota Highlander. The turbo-four Ford Explorer matches the 28-mpg highway figure, but loses by three in the city.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.