2010 Maza3 S on 2040-cars

Auto blog

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

Driving the Honda Ridgeline and marveling at Tesla | Autoblog Podcast #638

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Consumer Editor Jeremy Korzeniewski and Associate Editor Byron Hurd. They start off talking about why more people should buy the Honda Ridgeline, because it's a pretty darned good truck. Next, Byron talks about some Hyundais. He shares his experiences with the 2020 Sonata Hybrid and talks briefly about the prototype 2021 Elantra currently occupying his driveway. Up next, Jeremy shares his feelings about the BMW X1 crossover he spent some time with, prompting the gang to mull over the notion of BMW's modern interpretation of "Ultimate Driving Machine." After that, Byron talks about towing his 1990 Mazda Miata with the 2020 Infiniti QX80, and then they wrap up with some discussion of the mystery surrounding the Ford Maverick and some comments on the current state of Tesla. Autoblog Podcast #638 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Hauling dirt with the 2020 Honda Ridgeline Driving the 2020 Hyundai Sonata Hybrid Discussing the 2021 Hyundai Elantra Driving the 2020 BMW X1 Towing a 1990 Mazda Miata with a 2020 Infiniti QX80 News Ford Maverick tailgate stamping leaks; we may see the whole thing in 2021 Tesla reports profit for fourth straight quarter, setting it up to join S&P 500 Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: