2008 Mazda 3 I Sedan 4-door 2.0l on 2040-cars

Auto blog

2019 Mazda CX-5 to get 2.5-liter turbo and revised G-Vectoring

The 2019 Mazda CX-5 is getting Mazda's 2.5-liter turbocharged four-cylinder engine if this supposed internal document from Reddit is correct. The user claims a salesperson showed him the document in question. In addition to the availability of the turbo engine, Apple CarPlay and Android Auto appear to be added onto every trim level. Do take note that the document says it's from Mazda Canada at the bottom, so that's why the trim levels don't have the same names as they do in the U.S. Another interesting mention in there is G-Vectoring Control Plus. We've had Mazda's G-Vectoring Control technology for a little while, but never has a car come out with the Plus moniker on there. Our best bet is Mazda has revised its original G-Vectoring system for 2019; we'll have to wait for official information to see what exactly changed though. At the top of the page Mazda lists "substantial visual changes to the interior" as one of the highlights. The biggest change we can find related to that is a seven-inch LCD display added to the gauge cluster on what would equate to the Grand Touring trim in the U.S. At least Canada — and maybe we too — seems to be getting a fourth trim level called "Signature." This will probably consist of more expensive materials used throughout and maybe a few bonus tech features over the Grand Touring. The page shared looks plenty legitimate, but it's still best to maintain some healthy skepticism. It's also from Canada, so there could be some slight variations between how those cars are equipped versus those coming stateside. We're excited to see the 2.5-liter turbo in the smaller CX-5, though. It should give that car the extra punch it needs to fend off faster rivals in the ever-expanding crossover segment. Featured video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Mazda's first-quarter profit slumps on weak sales in U.S. and China

TOKYO — Mazda reported a 79% drop in quarterly operating profit, falling significantly short of estimates, as it continues to struggle with declining U.S. and Chinese sales, while a strengthening yen also cut into its bottom line. Operating profit at JapanÂ’s No.5 automaker was 7.0 billion yen ($64 million) in the first quarter ended June, versus around 33 billion yen a year ago and less than half of an average forecast for 18.5 billion yen from analysts polled by Refinitiv. Mazda, however, reiterated its forecast for a 33% rise in operating profit to 110 billion yen in the year ending March. ThursdayÂ’s profit announcement marks MazdaÂ’s poorest first-quarter operating performance since the June 2012 quarter. The automaker has been struggling with falling demand for its cars over the past year or so, while it is also recovering from flood-related damage to its factories in Japan that led to a quarterly loss in the July quarter of 2018. The Nikkei business daily on Wednesday had reported that operating profit at the company would fall around 70% for the quarter due to lower sales in the United States. Mazda posted global sales of 353,000 units for the quarter, down 12% from a year ago. Its sales in the United States, its biggest market, fell 15% to 68,000 units, while in China, Mazda sold 54,000 vehicles, down 21% on the year. A trade war between the top two economies and slowing growth in China, the worldÂ’s biggest auto market, have prompted a broad-based sales downturn in the global auto sector. Automakers are grappling with easing demand for cars just as they must invest heavily in new technologies including electric cars, autonomous driving technologies and ride-sharing services to survive a major industry shift away from car ownership. Many of MazdaÂ’s rivals at home and abroad have been reporting disappointing quarterly results, with Nissan and Ford also announcing job cuts and possible plant closures earlier this month. The United States is a key source of revenue for Mazda, but it imports all its vehicles sold there, exposing it to a threatened hike in U.S. tariffs on imported cars from Japan. To limit its vulnerability to possible tariffs and currency fluctuations, Mazda is investing in a new plant in the U.S. state of Alabama, a joint project with Toyota.