2007 Mazda Mazdaspeed3 Sport on 2040-cars

Auto blog

2016 Mazda6 and CX-5 see gentle price hike

Mazda has modestly updated the Mazda6 and CX-5 for the 2016 model year, and the company just announced revised pricing for the pair. The vehicles cost a little more now, but buyers also get additional features and an improved look. When it comes to the 2016 Mazda6, the already attractive sedan wears a revised look up front with more chrome and a redesigned cabin with a new instrument layout and seven-inch infotainment system on most models. Mechanically, things carry over with a 2.5-liter four-cylinder making 184 horsepower and 185 pound-feet and either a six-speed manual or automatic gearbox depending on trim. The base Sport trim with a six-speed manual gearbox costs $305 more than it did in 2015, and starts at $21,495*, plus an $820 destination charge on all models. Upgrading to the automatic gearbox at $22,995 also adds the revised infotainment system and reverse camera. Prices top out at $30,195 for the Grand Touring, which is $300 more than last year. All of the other versions see a $100 year-over-year increase. LED headlights are standard on the Grand Touring, but they can be added to the Touring through the Touring Technology package for $1,675. The 2016 CX-5 sees light exterior upgrades and similar interior improvements as the Mazda6, including the improved infotainment system for some trims. Pricing rings up for $250 more than last year, except the all-wheel drive Sport trim at just an extra $50. The cheapest CX-5 is the front-wheel Sport with a manual gearbox and 2.0-liter four-cylinder with 155 hp and 150 lb-ft, and it costs $21,795. All other models combine a 2.5-liter four-cylinder with 184 hp and 185 lb-ft with a six-speed automatic. Prices go all the way up to $29,470 for a CX-5 Grand Touring with all-wheel drive. There's a new i-Activesense package for the Grand Touring for $1,500, as well, that adds safety sensors and radar cruise control, but it can only be combined with the Grand Touring Technology Package for $1,505 with navigation and LED headlights. 2016 Mazda6 Pricing Announced IRVINE, Calif. (February 9, 2015) – Mazda North American Operations (MNAO) today announced pricing for its refreshed 2016 Mazda6 midsize sedan lineup. The 2016 Mazda6 is available in three trim levels – Sport, Touring and Grand Touring – and is equipped with the SKYACTIV-G 2.5-liter gasoline engine. There are a number of enhancements for 2016 including bold changes to the shape of the instrument panel and floor console giving the interior a fresh new look.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.