2007 Mazda 3 I Sedan 4-door 2.0l on 2040-cars

Auto blog

Japanese students turning Mazda CX-5 into Dakar Rally-ready off-roader

Students at Japan's Nihon Automobile College (NATS) are transforming a first-generation Mazda CX-5 into a full-blown off-roader that looks ready to compete in the Dakar Rally. Named CX-Runner, the one-of-a-kind model will make its debut at the Tokyo Auto Salon opening its doors in January 2020. The Tokyo Auto Salon is the Japanese equivalent of the annual SEMA show, so anything goes under the bright lights. NATS students began the CX-Runner project with a used 2012 CX-5 and seemingly set out to leave as few original parts as possible. While the project isn't finished yet, a sketch released by the school suggests the crossover will receive wheel arch extensions, an external roll cage, a beefier suspension, and a shorter front bumper that increases the approach angle.  Photos published on the school's official Facebook page show the project is moving along nicely. The body extensions are made with a composite material that looks like Kevlar, and fitting the rear wheel arches required sealing the back doors, which is fine; the CX-Runner will be a two-seater. We don't know if students are planning to make changes to the CX-5's powertrain yet, but a thick skid plate will protect whatever is under the hood from expensive impacts with obstacles encountered off-road. nats-mazda-cx-runner-project-1 View 3 Photos The Tokyo Auto Salon will open its doors on January 10, so the students have time to finish the custom-made body kit, install the suspension, paint the CX-Runner, and fit the roll cage. They're not just doing this for fun, though. NATS began offering a customizing class in 1998, and building a tuner car is one of the requirements aspiring builders need to fulfill in order to graduate. With that in mind, it's no surprise that NATS will again have a big presence during the 2020 edition of the Tokyo Auto Salon. In addition to the CX-5 off-roader, its students are building six custom cars including a Nissan 370Z roadster wearing front and rear fascias sourced from a GT-R, a Toyota 2000GT-inspired convertible based on the Suzuki Cappuccino kei car from the 1990s, and a four-door, five-seater Toyota 86 built on Camry bones but powered by the coupe's flat-four engine. Relate Video:

Mazda Miata getting i-ELOOP regenerative 'braking' in more markets

The Mazda MX-5 Miata is getting the company's i-ELOOP regenerative "braking" system in more overseas markets. A few months ago, the company announced it for the Japanese market, and this week it announced the U.K. will have the feature, too. This has us curious as to whether it will be offered on U.S. market Miatas. We've reached out to Mazda, and we'll update this story if and when we hear back. As a quick refresher, i-ELOOP is a system that was introduced here on the Mazda6 several years ago, and it adds a capacitor to store electricity generated by the alternator during deceleration (hence our earlier use of quotes around "braking") that can be used to run interior accessories such as the sound system and climate control. Then, with power coming from the capacitor, the alternator can be disengaged, improving the efficiency of the engine by reducing drag. And by using a capacitor rather than a battery, the system is more compact, lighter and able to recharge faster than a similarly capacious conventional battery. As for effectiveness, the Mazda6 with i-ELOOP managed to get about 5% more miles per gallon on the highway than one without, going from 38 mpg to 40 mpg. While not a massive improvement, it was a measurable, possibly noticeable one. Applying a similar gain to a Miata would increase fuel economy from 35 to nearly 36.75 mpg on the highway, based on the automatic-equipped car's numbers. The manual would go from 34 to nearly 35.7. The i-ELOOP system is standard on all new Miatas in the U.K., which includes the 1.5-liter and 2.0-liter engines with either the manual transmission or automatic. Strangely, only automatic-equipped cars get it in Japan. This means Mazda could offer it on both transmission options in the U.S. Probably the key consideration will be cost. The system, when it launched in the U.S., was only available on the most expensive Mazda6, and even then it was an extra-cost option. And looking at pricing for the U.K. Miata soft-top and comparing equivalent trim levels, the price has increased between GBP2,800 and GBP4,100. The new model does get some new standard safety features, too, but we expect the i-ELOOP system is a significant contributor. If it is offered in the U.S., it might only be available as an option, and possibly only on the more expensive trim levels to keep lower trims more affordable. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

This is what a 1,200-hp twin-turbo 4-rotor looks like in a Miata

We've seen the diminutive Mazda MX-5 Miata swallow plenty of big engines, but New Zealand drifting ace "Mad Mike" Whiddett is roaring into where-no-man-has-gone-before territory. Wanting to replace his 515-horsepower "MADBUL" RX-7 and its twin-turbocharged, three-rotor 20B engine, his new ride is an NC-series Miata with four rotors and twin Garrett turbochargers courtesy of Pulse Performance Race Engineering. It is called "RADBUL," and expected power at standard boost is 1,200 hp, but the builders at Pulse Performance think it will get up to 1,500 hp at full boost. And yes, that exhaust exits through the hood. Four-rotor engines are actually popular - builds are detailed on forums like this one from 2007 and this one from 2008, this UK company or this Canadian company will sell you one complete - but they're usually being prepped for an RX-7. Mad Mike's choice of a Miata for this enterprise makes this about as extreme as you can get, short of throwing it into a Mazda R360. You can watch Mad Mike tell the story of the build in the video, and check out the first and second installments about the build on the Red Bull site.