2006 Mazda Mazda3 5dr Hatchback S Touring 5-spd Manual -- Clean Carfax Report!!! on 2040-cars

Auto blog

Junkyard Gem: 1986 Mazda 323 DX Hatchback

Mazda built generation after generation of the Familia, starting with the Giugiaro-styled machines of the 1960s. The first Familia that sold well in North America was called the GLC (for "Great Little Car"), and it began life as a rear-wheel-drive cousin to the RX-7 before the Familia went to a front-wheel-drive platform for the 1981 model year. The GLC name stuck around these parts through 1985 — and I've documented a few discarded examples of these now-rare machines during my junkyard travels — before getting the 323 name starting in the 1986 model year. It's no sweat to find 1990s 323s in junkyards, but I've been scouring the car graveyards of the land for the elusive early 323 and, finally, found this moss-encrusted '86 in a San Francisco Bay Area yard. BMW popularized the lower-case-i nomenclature for fuel-injected cars with the first 3-Series back in the 1977 model year, and Mazda wasted no time making "1.6i" badges to tout the futuristic technology under the hood of their low-priced econo-commuter a decade later. At a time when most Civics had carburetors (and the notorious "Map of the Universe" diagram to untangle the underhood vacuum lines), the electronically fuel-injected engine in this car was a major selling point indeed. It wouldn't be many more years before the wretched Subaru Justy was the final carbureted Japanese car available in America, but this 1.6-liter B6 four-cylinder (which evolved into the engine that, flipped 90 degrees, powered the early Miatas) was high-tech stuff for a cheap car in 1986. Just 84 horsepower, but they were clean and reliable horses. In the middle 1980s, the common perception in North America was that you had to buy a Honda or Toyota if you wanted an affordable car that could make it to 200,000 miles. This 323 held together just as well as most Tercels or Civics from 1986. Of course, I've seen a junkyard RX-7 with 393,854 miles, so you just never know. When you see lots of moss and lichens on a car in a Northern California junkyard, you know it spent years — maybe decades — languishing in a shady outdoor spot. Perhaps this car racked up 20,000 miles per year slogging through a harrowing Lodi-to-Sausalito commute, then got parked and forgotten in 1996. We'll never know. With the optional automatic transmission — nearly every early 323 I've seen had the 5-speed manual — this car wouldn't have been much fun to drive. Point A to Point B would have been fine, though.

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

2015 Mazda3 finally pairs 6-speed manual with larger engine

With all of the hype and anticipation surrounding the 2016 Mazda MX-5 Miata, the Japanese brand was able to sneak another driver-oriented model into its lineup. The company's spec page for the 2015 Mazda3 hatchback and sedan have been updated to list the Skyactiv-G 2.5-liter four-cylinder as finally being available with a six-speed manual transmission, in addition to the previous six-speed automatic. The automaker had promised the row-your-own gearbox with the bigger engine back when it first announced the new Mazda3, but it waited a model year to actually put the combo on sale.
According to Mazda's specs, the manual gearbox trims 40 pounds off of a hatchback or 54 pounds off of a sedan in s Touring and s Grand Touring trims. However, shedding that weight doesn't necessarily boost fuel economy. The six-speed hatch is rated at 26 miles per gallon city and 35 mpg highway, compared to 27/37 for the automatic. The manual sedan is rated at 25/37 city/highway mpg, versus 28/39 with the auto. Buyers can save a little money by opting for the manual, though. Regardless of body style, it's about $1,050 cheaper than the automatic.
Autoblog reached out to Mazda and learned that the 2.5L 6MT models started hitting dealers in August. The 2.5 wasn't initially available with the stick because, "We had to prioritize engineering resources and the 2.5L 6MT was not a high priority combination. Globally, smaller engines are preferred in terms of sales," a Mazda spokesperson explained via email. The automaker also notes that Austrailia will probably be the only other market outside of North America to get the six-speed gearbox with the larger engine.