2006 Mazda 3 S Hatchback 4-door 2.3l Manual Trans Mazda3 Gt Clean!!!!! on 2040-cars

Auto blog

Did Mazda designer Derek Jenkins leave to head up a 'Stealth Project?'

Not long after Derek Jenkins officially gave the 2016 MX-5 Miata to the buying world, he's left the Mazda building. Jalopnik reported that the head of design for Mazda North America changed the current job description on his LinkedIn profile to "Stealth Project." Mazda backed up the discovery with this reply to Jalop's inquiry: Derek left Mazda last Friday. He left on great terms in order to work on a new endeavor. We wish him the best of luck. He will be missed, but we are sure that he will do great things in the next chapter of his career. That "last Friday" would be July 17. Emphasizing the "stealth" bit in his new position, as far as we can tell, Jenkins still hasn't publicly answered any question about what he's doing. Every automaker has secrets, but traditional automakers usually make a hubbub about hiring big-name designers, especially one with Jenkins' resume. For his new employer to go all Ghost Recon with all information, well that's the kind of mystery this summer needs. The obvious culprit would be a certain fruit-named company in a certain Cupertino, CA office park. If that ends up being the case, Jenkins would be the second chief designer at Mazda NA to go electric: he replaced Franz von Holzhausen in the position after von Holzhausen went to Tesla. Various other Apple Project Titan hires have made the news, though. For all we know, Jenkins' project might not be automotive. So let's just go ahead and cue the speculation. We're looking forward to whatever he's got coming, and to whoever gets nominated to keep the full head of Zoom-Zoom going at Mazda NA.

Mazda's Hofu plant builds its ten-millionth car

Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.

Mazda development chief discusses future rotary platform

The switch can again be flicked from "The Rotary Engine is Doomed" to "The Rotary Engine Lives!" Mazda is re-tooling the once nearly forgotten rotary to work as a range extender for hybrid vehicles, with a chance for it to do even more than that. The latest information sounds rather promising for those still holding out a candle for the rotary. Mazda's powertrain development chief, Ichiro Hirose discussed future rotary plans with the Australian Drive at the CX-30 crossover's launch. Hirose told Australia's Drive that Mazda is currently working with a very flexible and efficient rotary hybrid platform that doesn't necessarily come with the heavy emissions and fuel consumption baggage the rotary engine has earlier been saddled with. Hirose calls the rotary-based solution "XEV," referring to its adaptability. "It has the generator function and also it can be used to provide the drive force to give you traction. [...] Because the rotary engine is compact in terms of its packaging size [and] if we should choose to do so we can have the generator, rotary engine and electric motor all in one [driveline] because of the small packaging." The result is an electrified platform that could be made to work as a mild hybrid, series hybrid or a battery electric vehicle with a rotary range extender (if given a plug), depending of the required implementation. It's as if Mazda had a slider to adjust the balance of using a rotary engine and using electric power, to make the platform more of a jack-of-all-trades. Hirose explained: "If you reduce the other way around it could be a pure battery-electric, using really the rotary engine as a range extender and, according to the balance, you can even provide something akin to the series hybrid that is providing the drive force. [...] So, we are looking at a wider coverage and scope. Based on this architecture it allows us to do that, to explore the huge range of applications we can have with the rotary." The platform would also be flexible when it comes to meeting various stringent emissions standards. To be able to sell XEV-based vehicles globally would mean introducing a certain setup for one region and one for another, keeping in mind when the rotary power would kick in and how. While Hirose keeps the question open whether these vehicles would make it for sale in the United States, he says Mazda would be able to make them pass U.S regulations. "I'm just saying that — theoretically — if we were to introduce it in the U.S.