2.5l on 2040-cars

Auto blog

Mazda CX-3 almost ready for LA Show

The Mazda CX-3 is just days away from its unveiling at the 2014 Los Angeles Auto Show, but elsewhere in the world, the Japanese brand still has the compact crossover disguised for testing. These spy shots aren't too camouflaged though, and when combined with the previous teaser image, they give a pretty clear idea what the new model will look like.
The grille here is well covered, but the photo from the front reveals the similarities to the design sketch. The rear shows a similar horizontally oriented design as the Mazda2, which the CUV is based on. However, the dipping sides around the B-pillar from the teaser don't appear to be on this tester. Even with all the swirls, the vehicle looks fairly attractive.
Mazda is doing a fantastic job of keeping mechanical details about the CX-3 a secret. It's not yet known whether the model is front-wheel-drive only or if all-wheel drive is also an option. The crossover also likely shares the Mazda2's engine, which isn't revealed for North America, yet. The diminutive CUV will compete with a huge crop of new classmates, including the Fiat 500X, Jeep Renegade, Chevrolet Trax and Honda HR-V. Check out the gallery for the latest glimpses of this Japanese CUV just days ahead of its full debut.

Bauer Catfish is a Miata-based trackstar in the making [w/videos]

We're not trying to make a joke here. The creation you see above really is called the Bauer Catfish, and while the name is about as attractive as your average bottom feeder, the car itself is built on a sexy notion. Take the mechanical bits of one 1990-2005 Mazda MX-5 Miata, add in a tube chassis for as little weight as possible, complete with some custom body work and go forth. Bauer says the finished product weighs in at just 1,550 pounds, and the company will be happy to pull the stock four-cylinder to drop in a healthy General Motors LS V8.
The pre-production prototype shown above competed in last year's 25 Hours of Thunderhill, finished the race and earned a spot on the podium in the "anything goes for sports racers" ESR class. Very cool.
If you're looking for a dedicated track car, it may not get any better than this for the money. Expect to pay around $13,900 depending on options, plus the cost of your donor Miata. That's a good sight cheaper than a used Chevy Corvette Z06 and likely to be quite a bit more fun. After you're done watching it in action in the brief videos below, check it out over at Bauer Ltd.

Mazda development chief discusses future rotary platform

The switch can again be flicked from "The Rotary Engine is Doomed" to "The Rotary Engine Lives!" Mazda is re-tooling the once nearly forgotten rotary to work as a range extender for hybrid vehicles, with a chance for it to do even more than that. The latest information sounds rather promising for those still holding out a candle for the rotary. Mazda's powertrain development chief, Ichiro Hirose discussed future rotary plans with the Australian Drive at the CX-30 crossover's launch. Hirose told Australia's Drive that Mazda is currently working with a very flexible and efficient rotary hybrid platform that doesn't necessarily come with the heavy emissions and fuel consumption baggage the rotary engine has earlier been saddled with. Hirose calls the rotary-based solution "XEV," referring to its adaptability. "It has the generator function and also it can be used to provide the drive force to give you traction. [...] Because the rotary engine is compact in terms of its packaging size [and] if we should choose to do so we can have the generator, rotary engine and electric motor all in one [driveline] because of the small packaging." The result is an electrified platform that could be made to work as a mild hybrid, series hybrid or a battery electric vehicle with a rotary range extender (if given a plug), depending of the required implementation. It's as if Mazda had a slider to adjust the balance of using a rotary engine and using electric power, to make the platform more of a jack-of-all-trades. Hirose explained: "If you reduce the other way around it could be a pure battery-electric, using really the rotary engine as a range extender and, according to the balance, you can even provide something akin to the series hybrid that is providing the drive force. [...] So, we are looking at a wider coverage and scope. Based on this architecture it allows us to do that, to explore the huge range of applications we can have with the rotary." The platform would also be flexible when it comes to meeting various stringent emissions standards. To be able to sell XEV-based vehicles globally would mean introducing a certain setup for one region and one for another, keeping in mind when the rotary power would kick in and how. While Hirose keeps the question open whether these vehicles would make it for sale in the United States, he says Mazda would be able to make them pass U.S regulations. "I'm just saying that — theoretically — if we were to introduce it in the U.S.